Jump to content
SAU Community

R33 Rb26dett With R33 Rb25det Gearbox, Which Triple Plate Do I Purchase?

rb-brody
 Share

Recommended Posts

rb-brody Apprentice

rb-brody

Posted
Posted

Title pretty much says it all, not sure what clutch to buy exactly, do I buy an rb25 clutch or an rb26 clutch and then which series do i buy? I r33?

Recommendations on your favorite triple would be awesome, the car will mainly be used for drift with some limited street use. Looking for a clutch to hold 1000hp, need it as soon as I can, awaiting to have the motor balanced!

Thanks again guys!

rb-brody Apprentice

rb-brody

Posted
  • Author
Posted
You need a clutch to suit the gearbox. Is the gearbox push or pull type?

As for a clutch recommendation Os giken quad plate.

Thanks for the reply, the gearbox is being sent over so I do not have it in my hands as of yet. Are some r33 rb25det gearboxes push and some pull? I need the clutch assembly now to balance my motor which is being built.

-Brody

rb-brody Apprentice

rb-brody

Posted
  • Author
Posted
All r33 S1 and S2 gtst boxes are push type.

Cheers,

Johno

Probably a dumb question but there is only S1 and S2 r33 gts' correct... haha this is an embarrassing post.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...