Jump to content
SAU Community

Recommended Posts

It just occured to me the other night that i noticed the seatbelt icon on my dash(little dude with the seatbelt-on sign) doesn't come on anymore...

cos normally when the driver's side seatbelts aren't buckled in the icon will light up etc etc....now nothing at all....

Anyone had this happen to them? Any ideas what's going on?

thanks;)

Link to comment
https://www.sau.com.au/forums/topic/24551-seatbelt-icon-disappears/
Share on other sites

Originally posted by skyliner33wa

i thought that the seatbelt fastened feature was removed and seatbelts replaced during compliance?

Kris

No only the rear belts are changed. Front ones are factory. Yea check the electrical connection under the seat and then the bulb in the Dash. If that doesn't fix it,,,give up it's not worth working out.

Neil.

Originally posted by ndr

No only the rear belts are changed. Front ones are factory. Yea check the electrical connection under the seat and then the bulb in the Dash. If that doesn't fix it,,,give up it's not worth working out.

Neil.

Pretty sure mine has been changed then, i have had 2 skylines and both times no seatbelt light, are their supposed to be wires, or a connector coming from the seatbelt?

cheers

kris

i want the light!! you guys reckon there would be a way to hook it up?

has anyone check their belts with those from a wreckers without change made!! see if those plugs do actually plug into the clips?

I want the factory seatbelts! :) Well at least for the front, who cares about the rear passengers :)

Incidentally, even though my car was registered as a 4 seater, the compliancers nicely left the middle factory seatbelt in place, but under the seat. The previous owner probably didn't even know they were there :)

Does anyone know if the S14/15 200SX front seatbelts are the same as the R33's? It might be a good way to get some nicer seatbelts legally. Ones that use the seatbelt light, retract properly, and have that plastic thing to hold the belt off your shoulder.

Sorry guy's I should have worded my reponse a little better,,,,what I meant to say is the Fronts have to be changed as well,,,but It's quite legal for the Compliancer to buy New Factory Belts and install them. Thats how most of us still have the light working on the dash. Go check the white tag on your front belts,,,,Mine has Genuine Nissan belts with a built date on it,,being 2001.

Neil.

Originally posted by JimX

Ndr, how much are the new belts worth? Probably several hundred each ;)

JimX,,,I have no idea but mine have 2001 stamped on them and they have to be factory belts,,,.I'm thinking though if the tongue of the actual belt is the same as the buckles (this is what turns the light on and off) then you would only need to buy the buckle. Why not pop out to Justjap and ask them,,,,they might/should have buckles,,,you could try one.

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...