Jump to content
SAU Community

Recommended Posts

I hope someone might be able to give me some ideas on what to check.

I disconnected the battery to wire in a 12v and Gnd for an elec boost controller on my R33 GTS-T. Once i finished i connected it back up and the alarm went off thats fine. But i tried to use the remote to unlock it and turn off the alarm no go. I turned off the sound manually then tried to start the car no go. So i figured ok the car is immobolised.

Called the ppl up that put in the secuirity and they told me a way to by pass the immoboliser so i did that, still no go. He said to check all the fuses and i have checked all the ones i know about. Couple in the boot engine bay and drivers footwell.

All the normal electrics are on like headlights and dash but the windows and audio which didnt work untill it was unlocked are not however working. The LED for the Alarm is also not flashing at all, which isnt right cos it would flash when it was unlocked or locked before. when i put in the key and turn it over i cant hear any noise.

Is there anything else i can check? Hidden fuses, relays i need to check?

Link to comment
https://www.sau.com.au/forums/topic/245858-r33-wont-start-please-help-d/
Share on other sites

if it is possible to get someone to come out from the company whom installed the alarm i would start there sounds like something wrong woth the alarm

i.e immobiliser.

just my 2c

Edited by sIIgtst
if it is possible to get someone to come out from the company whom installed the alarm i would start there sounds like something wrong woth the alarm

i.e immobiliser.

just my 2c

I know it does still sound like it could be the immobiliser but he assured me that if i shorted the correct wires behind the ignition back to there original places it would bypass the alarm and allow it to start. And the answer would be no to getting someone out to look at it at this stage :S

So you have removed the alarm unit?

Yeah the guy that installed it gave me a way to bypass it so i guess that cant be it.

Try checking all fuses with a test light, some fuses look fine but are blown.Immobilisers generally have fuses close by the unit, follow all wiring related to it and check fuses.

Thanks for the suggestions

There are a few fuses near the alarm i have checked them and all the ones in the driver kick panel, engine bay and in the boot.

There also seems to be no electricity getting to the dash status lights or the security system :S what else could cause this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...