Jump to content
SAU Community

Recommended Posts

hi i have a RB25DET and it is stock really. and i was thinking about replacing the turbo with a supercharger like the ones that they use in the holden LS supercharger upgrades that u can get. and it would be nice to know if any body else has put a supercharger on, if it will work, what i will need, and what do i expect to get out of it.

im looking a supercharging it because as i understand it a turbo restricts the exhaust and has two turbines one to power the other which will lower the efficiency of the turbo especially in low rpm were as supercharger will be powered by a belt and is most likely to be more efficient.

if i am way of track then plz tell me

and yes i have seen

http://www.skylinesaustralia.com/forums/Su...er+turbocharger

i am looking a the performance between a turbocharger and a supercharger and also the price difference and what is needed for a upgrade

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/
Share on other sites

a supercharger is basically a boring version of a turbocharger.

its good for low down power but the top end is no where near as fun.

it takes power from the crank and uses that to suck in air and force it in

a turbo uses exhaust gasses that are already there.

get in a car with a real turbo and see what you think :ermm:

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280062
Share on other sites

if you really wanna make it worthwhile it from the ground up with a 3lt bottom end stroker kit, twin turbo and a centrifugal supercharger running into a positive displacement supercharger :ermm:

hope you brought your wallet

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280156
Share on other sites

a friend of mine had a supercharged rb25/30 in his vl commy. The amount of time and money it cost was really not worth it. Basically everything needed to be custom made and fabricated, even down to the supercharger. Dont get me wrong, the car went really well, but its a lot cheaper and easier to upgrade the turbo on an rb25

Depends on how much your willing to spend to be different

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280459
Share on other sites

im looking a supercharging it because as i understand it a turbo restricts the exhaust and has two turbines one to power the other which will lower the efficiency of the turbo especially in low rpm were as supercharger will be powered by a belt and is most likely to be more efficient.

if i am way of track then plz tell me

Incorrect, a turbocharger is more efficient because it is using something from the engine to make power which is not being used for anything else ie. exhaust gases.

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280886
Share on other sites

Some people were all into doing this on their N/A VL's 3 or 4 years ago, basically isn't worth it for the cost, especially on a small displacement motor. Their usefulness on V8s is even being brought into question with the proliferation of reletively cheap off the shelf turbo kits floating around these days.

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4281074
Share on other sites

i ran a torana at speedway many yrs ago that run a gm 471 blower with a ait split pulse t4 turbo blowing into the top of the blower .

it was awseome to drive the blower got it of the line like a cat with deep heat on it;s balls and the turbo kept enough air into it down the straights . it was a old 186 block with a 221 falcon crank with a alloy phill irvin head and mechanical endlee methanol injection .

got 3 seasons out of that set up b4 it dropped the crank out of the block every thing was custom made and cost a mint back then but you could not buy anything off the shelf . won many a race beating 350 powered cars i loved it lol

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4281971
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This. The R34 handbrake icon DOES come up when the brake fluid level is low. You might be sitting right on that threshhold. I have been down this diagnosis path and this was the solution (and it was pretty much as full as your picture is to begin with).
    • Unfortunately the cavaet to that is that while any scan tool should be able to read the code, the workshop will need a consult plug to OBD socket adapter. You don't have a location on your profile, where are you based?
    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
×
×
  • Create New...