Jump to content
SAU Community

Recommended Posts

i'm sick of paying $600 for good tyres that are 275 wide, i run gmax enigma rims, and the rears are a killer. so i've decided to stick with something smaller and get even better tyres..... still less than half price of pirellis! so i have my eye on the standard r32 gtst wheels (wheel pic attached) and i was wondering if they can clear the 33 gtst brakes... ANY help would be excellent, cheers!!!!

Slav

post-50733-1227514814_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/246213-will-32gtst-rims-fit-a-33gtst/
Share on other sites

what size/wide are ur enigmas's? and yes they will fit

enigmas are a 18 x 9.5 rear, wearing 275/35's and fronts are 18 x 8.5's wearing 235/40 if i remember correctly. looking for trade on smaller rims also, as per for sale thread :P thanks for the info dude, helps heaps

slav

u don't need to have 275 35 mate...9.5 can wear a 245 40 tyre pretty happily and wil lcost less ebcause its a common sized tyre...think ur spending too much on tyres that u don't need...or else stop dropping skids lolz

haha, no skids here, just handbrake turns, well that makes me feel better, i dont know how the 245 will sit, the 275's sit pretty flush on the rear. the car does get quite a workout. i track it regularly and semi slick 275's cost me a kidney last time i bought them. anyways, youve opened up a whole new world of tyre choice for me... thanks :wub: all i can do is ---> :P:):wub:

^^ exactly....i mean u could even do 235/40 and it will have just slight stretch...some people on here run 10" wide wheels with 215!! crazy stretch but of course illegal lolz. ur fronts could use 225/40's aswel.

if someone told u to get 275s on ur rears they should be shot. 255 at max. 275s should be fitted on 10"-11"

Edited by jakez88
275's on a 9.5" rim is the correct size.

How do you figure that?

A 9.5" wide rim is roughly 240mm wide in mm, a 275 tyre is 275mm wide..

You'de run something like a 235 or 245 tyre which would fit nicely on the rim, anything bigger than that and it will be baggy

275 is just over kill, what a waste of money

For the price difference from a 235 to a 245 tyre is quiet a jump when your buying a full set, I'd save the extra cash and go with the 235 tyre as your only losing 10mm/5mm on each side which is nothing

245 is probably still a bit over kill, save some more cash and go with 235. That will save you heaps of money as there is a bit of a price jump from 235 to 245

Factory those rims come out with 205 so your not losing anything

How do you figure that?

A 9.5" wide rim is roughly 240mm wide in mm, a 275 tyre is 275mm wide..

You'de run something like a 235 or 245 tyre which would fit nicely on the rim, anything bigger than that and it will be baggy

275 is just over kill, what a waste of money

For the price difference from a 235 to a 245 tyre is quiet a jump when your buying a full set, I'd save the extra cash and go with the 235 tyre as your only losing 10mm/5mm on each side which is nothing

You obviously don't know where wheels get measured from :sick:

A 9.5" rim isn't measured from edge to edge, it's measured from where the bead of the tyre sits. for instance a stock R32 gtst rim is 6" wide but the total width of the rim is 7.5". The same goes for diametre. the total diametre of the same rim is just under 17.5" but where the bead of the tyre sits is 16".

So according to your 'figuering' these rims should have a 153 tyre on them................ :)

245 is probably still a bit over kill, save some more cash and go with 235. That will save you heaps of money as there is a bit of a price jump from 235 to 245

Factory those rims come out with 205 so your not losing anything

Nuh man the 245's on my rim sit perfectly, not overkill at all. No stretch and it dosnt hang over the side of the rim. perfect fit. I heard that you probably shouldnt go over 255 on a 9.5 inch rim or it will start to look gay.

Im running 235's on my fronts that are only 8.5 inches wide, also sit perfectly.

i dunno but to me i just wouldn't wanna buy a tyre more than 255 for a 9.5" wheel unless i need to for some reason...doesn't seem right having 265's or 275's hanging over the wheel?

i have 8 up front a 9 in rears...i have 215 45 bridgestones which give slight stretch and 235 45 advan neovas on rear and are perfect if not the slightest stretch.

now if a 235 tyre is hardly stretched on my 9s...on 9.5s i think they'd have a good stretch. 245 should correct the stretch..so anyway in the OP case having a 235 or 245 tyre would be best as it would be cheaper then running anything bigger obviously especially running 275

P1010234__Large_.jpg

thats a 275 on a 9", doesnt look "gay" to me.

it also depends on the tyre brand, as those same rims had 235's on them when i got rid of them, and the 8" front looks fine, the 9" rear is stretched a little.

245 on 9.5 " is the legal minimum size. that's what i run and i am definately fan of the look... slight stretch, and legal... just :P

235's are cheaper as they are more common, but it depends on the tyre... bridgestone adrenalins are around 380 a corner in 245/40/18

You obviously don't know where wheels get measured from :blink:

A 9.5" rim isn't measured from edge to edge, it's measured from where the bead of the tyre sits. for instance a stock R32 gtst rim is 6" wide but the total width of the rim is 7.5". The same goes for diametre. the total diametre of the same rim is just under 17.5" but where the bead of the tyre sits is 16".

So according to your 'figuering' these rims should have a 153 tyre on them................ :D

lol I know how rims are measured man

but hey if you want to run a 275 tyre on a 9.5" rim go nuts, certainly looks gay to me. Pictures above compliments of Mitch to show how gay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...