Jump to content
SAU Community

Gt35r Vs Garrett T04z - Discussion (just Post In This Thread To Create A Database)


Recommended Posts

Turbo characteristics are gonna be different on the 30 than 25 or 26 setups. what about the hybrids. im throwin up ideas at the moment of ideal setups to maxiumize HP within scope of tracking and some street. and so far ive scaled down to these 2;

GT35R X82 S.S 25/30 Final 3.9

To4Z x106 T.S 26/30 Final 3.5

Oh ps. the TO4Z in the Equation will be the HKS item.

My mate has a T04Z on his 25/30 and I am in the process of putting a GT35R on my 25/30, I guess I should use the same dyno/tuner to keep the intrawebz fanbase happy ;)

The fact that one is 4wd and the other isn't, shouldn't make much a difference?

This will be interesting - do you have a dyno plot in storage somewhere which could be overlayed with the T04Z one to see how much more lag etc you get on the same engine spec?

Any reason for going the T04Z over something like a GT4088R? Shame the GTX-series turbos aren't out for a bit, I have a feeling if Garrett do a GTX3582R T04Zs will lose a bit of their edge

Yup, dyno plots are saved and engine combo isn't changing, so it's literally just going to be a bolt off bolt on situation.

0.84 twin scroll T04Z ordered... will be here Friday, fitted Monday, tuned Wednesday.

My mate has a T04Z on his 25/30 and I am in the process of putting a GT35R on my 25/30, I guess I should use the same dyno/tuner to keep the intrawebz fanbase happy :D

The fact that one is 4wd and the other isn't, shouldn't make much a difference?

um Drivability wise sure it would, but i think main emphisis on power output wont be much different if the 4wd has only 2wd engaged at time time, and they both share the same Ratios.

Id be keen to see the results from both.. and ofc. supporting mods also.

um Drivability wise sure it would, but i think main emphisis on power output wont be much different if the 4wd has only 2wd engaged at time time, and they both share the same Ratios.

Id be keen to see the results from both.. and ofc. supporting mods also.

Obviously drivability would be significantly different! lol

Maybe it won't be so direct a comparison then.. my final drive ratio is 3.9:1 whereas I believe his is stock gts4 (4.3:1?).

He is also running HUGE cams (280s & 10.5 lift I think) whereas I'm not :wave:

what did it make bubba? mine on 18psi has made 585rwhp with the 0.81 t04z on 98 pump fuel (Not on a happy hubber either lol).

Brockas gt35 isnt exactly the same as what everyone else is running so dont know if his comparision is gonna be that clear, he is using the t4 housing on the 35 which surely effects results.

But none the less will be good to see the difference.

Edited by unique1
what did it make bubba? mine on 18psi has made 585rwhp with the 0.81 t04z on 98 pump fuel (Not on a happy hubber either lol).

Brockas gt35 isnt exactly the same as what everyone else is running so dont know if his comparision is gonna be that clear, he is using the t4 housing on the 35 which surely effects results.

But none the less will be good to see the difference.

yeah but 70deg of timing helps with power :P

Anybody here ever thought of switching to a Precision Billet 6765? Its a 67mm like the T04Z but has a redesigned billet compressor wheel which is lighter and made more aggressive to outflow any of the old 67mm turbos. A guy here in the states has one on a RB26 and he put down 763whp @ 32psi. Some 2JZ guys have it putting down 800+whp and one Evo guy i know of did 900+hp @ like 40psi with it. I didnt believe the 900hp thing till he ran it down the track and trapped 153mph.

yeah but 70deg of timing helps with power :happy:

lol just because yours couldnt even crack 575hp on 25psi+ boost :P Put good quality bits in the motor and some good headwork/big cams and you will be suprised. Wait till its in a car again and new ecu with no misfire problems and then things will be alot different.

haha thought that might stir you up...

mine went 574 @ 24psi thank you very much!!!

plus it also went 560rwhp at 20psi but yoda backed off timing so it was nice and safe :down:

brockas should make anywhere between 560-600rwhp i would imagine, hopefully 573.9 so I can give him shit for years to come :)

Edited by Cerbera

Mikes gts4 made 580hp at all 4 hubs on only 1.3bar as Sean didn't want to lean on it right away. Pretty sure there's no headwork other than what was required to fit the huge cams.

All I can say is 3L + T04Z + 32GTS4 = insane!

cerbera.. who is this yoda you speak of?

I will need my 26 to4z tuned shortly and trying to decide who i am going to get to tune it.. was previously tuned by mick at ovaboost

Have you had problems with Mick's tuning in the past? From my experience he is the bomb and wouldnt think you would need to change unless something went wrong. But then again, there is no harm in trying someone else!

Looking forward to results Brocka's.

cerbera.. who is this yoda you speak of?

I will need my 26 to4z tuned shortly and trying to decide who i am going to get to tune it.. was previously tuned by mick at ovaboost

i have not used mick, but i have been there when he has tuned a few mates cars and i thought he did a good job (dyno is a bit ancient nowdays haha) and i have only heard good things about his tuning ability

yoda = ant scali at xspeed

if your looking for suggestions i would suggest ant @ xspeed or sean @ allstar!

ant has tuned all my cars in the past and done a great job, sean did the run in tune for my gtr and is going to be the one tuning my new car :thumbsup:

Edited by Cerbera

best results seem to be from 270/272 types with between 10.2 and 10.8 lift

edit: just realised your running a rb25 woops sorry, the ones above are for rb26

Edited by Cerbera

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...