Jump to content
SAU Community

Recommended Posts

Hey guys n gals,

So i stumbled upon this company tonight called "Nagoya Motors" and they look pretty good for importing (maybe). I'm looking at importing a RS Four S wroughly 1999.

Anywho has anyone heard of them before, or used them or know someone who has used them???

I'm kinda unsure about importing still and would like some feedback about companies first. I was loking at J-Spec and have heard lots of good thing about them, but then stumbled upon these guys and thought it might be another option.

Anyway let us know what you know. Heres the link to their site. http://www.nagoyamotors.com.au/

Thanks

Link to comment
https://www.sau.com.au/forums/topic/246709-importing-company/
Share on other sites

from one of my best friends experiences, i personally wouldnt use j-spec... him and his brother had the same issues...

i am considering Iron Chef for my next purchase, for Honestly, for a Stagea, there are SO MANY in Oz, just grab one locally and save the heart ache lol

Hey guys n gals,

So i stumbled upon this company tonight called "Nagoya Motors" and they look pretty good for importing (maybe). I'm looking at importing a RS Four S wroughly 1999.

Anywho has anyone heard of them before, or used them or know someone who has used them???

I'm kinda unsure about importing still and would like some feedback about companies first. I was loking at J-Spec and have heard lots of good thing about them, but then stumbled upon these guys and thought it might be another option.

Anyway let us know what you know. Heres the link to their site. http://www.nagoyamotors.com.au/

Thanks

I bought my stagea from them (although I didn't import it) it was just off his lot & was the first Australian owner.

I'm pretty happy with the car, haven't had any major probs although I did get a pre purchase inspection, which Alex, the owner of Nagoya motors, had absolutely no problem with. I think you'll find there are always going to be good and bad stories about any company.

I would have to agree with Ryan1600 and say purchase one locally. That way you can have it checked out.

Mine came with a 3 year extended warranty, (just replaced the o2 sensor, $390 all up including labour for S2 neo genuine part) and 24/7 agreed to pay the claim, no probs.

from one of my best friends experiences, i personally wouldnt use j-spec... him and his brother had the same issues...

i am considering Iron Chef for my next purchase, for Honestly, for a Stagea, there are SO MANY in Oz, just grab one locally and save the heart ache lol

I imported with J-Spec and i can tell you the experience overall was positive, so i would have no problems recommending them.

However, with the exchange rate the way it is now, do you really want to import? I imported a 99 RS Four S, and at the time

it was estimated about $15,300 landed and complied. I ended up paying about $16,000 all up so it wasnt too far off the mark.

If i was to import my car now instead of months ago when i did it, it would now cost roughly $22,000-$23,000, a difference of

about $6000-$7000. So if you find one on an importers website that is now expected to arrive for about $15,000 or there abouts,

you could only imagine it must be in terrible condition.

Anyways just thought i would give you one perspective :D

Yeah, as above, why import with the exchange rate the worst it has been in years???

There are many cheap RS four S availble for $15-16k. Yes, a manual for the same price I paid two years ago for my auto. Not the right time to import at all mate!!

....just replaced the o2 sensor, $390 all up including labour for S2 neo genuine part

sweet baby jeebuz on a tricycle!! Non genuine O2 sensor cost me $60 and about 1/2 an hour to install because the heat shield was a PITA to get off. (Teh Fury shares the same 02 sensor as the stagea and R34 skylines)

But yeah, to stay on topic, +1 for buying locallly.

I would have to agree with most people here and buy locally. Most of them have just arrived in the country or they are the first aussie owner. I brought my RS Four V Prime Editon for 18k back in Januray this year and now they have dropped down in price by about 4-5k and manuals have dropped big time (at the time a manual S2 was about 22-25k)

I would be looking at the importers if you are looking for something specific (such as a 260RS or Stagea in bayside blue for example). I was going to go through either J-Spec or Prestige Motorsport when I was looking for my car when I stumbled upon my one

Also have you the "Importing Vehicles" section and see if anyone is posted about Nagoya Motors??

Edited by BigDirtyJase
sweet baby jeebuz on a tricycle!! Non genuine O2 sensor cost me $60 and about 1/2 an hour to install because the heat shield was a PITA to get off. (Teh Fury shares the same 02 sensor as the stagea and R34 skylines)

But yeah, to stay on topic, +1 for buying locallly.

Yeah its a shite load, if I had to pay for it myself it would have been the EL falcon sensor and done at home.

Yeah its a shite load, if I had to pay for it myself it would have been the EL falcon sensor and done at home.

Nah, dont do that. I used an NKN one that was listed for the skyline. Cost me a grand total of $59 and it came with the correct plug and all. Just slipped the old one out and the new one straight in. I will see if I can drag the part number up and post it over the weekend. I even see the same ones on ebay for ~$125. :unsure:

Even though I've had my car for just over 3yrs, I'm still on the mailing list for J-Spec and Prestige, and I received this from Prestige the other day:

Well, what more can you say about the world economic situation and the recent exchange rate fluctuations ? Not much, other than extremely volatile and hard to predict, with pricing changing on a daily basis. We have of course been receiving many enquiries from customers for advice on what to do and when to import. Clearly without having a crystal ball and knowing what will happen all we can do is to comment on current pricing and general trends which should give some insight. We've been holding off on sending out an update until now, so we could gain some useful perspective.

Everyone wants the best deal so here are our current thoughts which may help you to achieve that.

Prices are definitely falling at auction in Japan by significant amounts as sellers become desperate to clear vehicles. Japan has just had it's lowest annual new car sales figures in several decades and today has officially been classified as slipping into recession, overall this means fewer dealer trade-ins and less stock at auction. But supply is STILL outstripping demand and so auction prices continue to fall overall. The more common models tend to fall in value more quickly as the few buyers out there can really pick and choose. In this respect at least, it's a great time to be a buyer.

While auction prices are falling to unheard of levels, with an exchange rate currently under 63 Yen to the AU dollar this affects the final pricing here in Aust. in the other direction. This means a number of important things as explained below.

Lower priced vehicles such as those under $15,000 complied (1988 and older collector vehicles, AE111 Levins, Legnums, Caldina's, R33 Skylines, Aristo's, Soarers, some cheap race cars like 1996 and older RX-7's and EVO's) are definitely still worth considering as the final price is similar to prices earlier this year. As the vehicles are cheap to buy in Yen, the exchange rate doesn't play as large a part in the final pricing as it does for more expensive vehicles, and there are still some very nice low km examples to be sourced given a little effort.

Vehicles in the $20,000+ range are being significantly hit in terms of total import price due to the exchange rate, this is despite the prices in Japan dropping significantly in the last couple of months. At 62 Yen to the dollar the reality is that it is not really viable to be importing a vehicle of this value compared to the recent pricing of only a few months ago. Of course, there will be the occasional bargain that is still amazingly cheap (if you are in the right place at the right time) and naturally we are still happy to put the effort in to track these down to order if customers wish. But our general advice if for example you want a V35 Skyline, EVO 6, 7 or 8, or other vehicle in the $20,000+ range is to hold off and wait for the exchange rate to recover.

As it is, given that Chistmas and New Year are not far away, anything bought now would not realistically be on road before mid-February 2009. So waiting a couple of months is not going to hurt.

A rate recovery is bound to occur in conjunction with Aust. commodities but how long it will take and the extent of this is impossible to predict at this stage. Our best guess is that the rate could fall a little further before we see a rise in the first few months of 2009. With prices continuing to fall at auction over this time, if we see 70+ Yen to the dollar then there could well be bargains aplenty at auction and those with cash and patience may be well rewarded.

Another option to consider if you want something a little sooner is to grab a vehicle left in stock that one of our suppliers is keen to move at a loss to keep the price the same as what it would have been 2 to 3 months ago, such as this outstanding V35 4-door which is optioned up and in lovely condition:

http://www.prestigemotorsport.com.au/modul...hp?StockID=4686

But you would need to hurry with this approach as suppliers that have not already sold or auctioned their remaining stock at firesale prices are planning to do so very soon to clean out their yards. So let us know what you are looking for and we will let you know if there is anything available that suits and negotiate the best deal.

thanks people for all ur coments. i had been thinking about the whole exchange rate thing...its a pain in the ass realy...so when i saw Nagoya with a stagea in stock i thought it would be a good option.

that said i wont be getting the car till early next year so who knows what could happen between now and then.

for those who would like to know i sent a email off to Nagoya n recived one back the next day...n they confirmed what i thought.

anywho keep any info u peeps have coming...it all helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...