Jump to content
SAU Community

Just Installd Fmic On R33 S2 Have Question

boostn0199

By boostn0199,
in Engines & Forced Induction

 Share

Recommended Posts

boostn0199 Grand Master

boostn0199

Posted
Posted

Hi ive just put in a fmic into my s2 r33 with mods exhust and air intake, and i feel alot more lag which i expected and once it kicks in you do feel signifcant power and also my 0-100 times seem to have worsened is that normal.

Jay_stylz Proficient

Jay_stylz

Posted
Posted
Hi ive just put in a fmic into my s2 r33 with mods exhust and air intake, and i feel alot more lag which i expected and once it kicks in you do feel signifcant power and also my 0-100 times seem to have worsened is that normal.

no wat brand did u use? the car shouldnt lag should increasen power if anyhthing?

PM-R33 Grand Master

PM-R33

Posted
Posted

In theory a larger intercooler or longer piping will make more lag due to it taking longer to pressurise a larger volume of air, simple physics. However in your case, the lag increase wouldn't be noticable, so if you can actually notice a difference and its not a placebo affect i would check over everything. You didn't leave a hose clamp a bit loose and its leaking a bit of boost out? Does it hold peak boost or is it fluctuating?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...