Jump to content
SAU Community

Wanted: Standard Gtr Injectors

SSHatch

By SSHatch,
in Tasmania

 Share

Recommended Posts

SSHatch Collaborator

SSHatch

Posted
Posted

As it says!

After one or a set of standard GTR Injectors as I have one leaking. Please no "just get bigger one's" suggestions as I plan to in the near future but simply need to get the car up and running for a leavers dinner this weekend.

I also need the seat-belt escutcheon in the rear pillar trim as mine was broken by poor repairs carried out by a workshop.

I have a picture of the part I am talking about.

SeatBeltTrimWiring2.jpg

SeatBeltTrimWiring1.jpg

PM with contact details.

Link to comment
Share on other sites
DJRIFT Veteran

DJRIFT

Posted
Posted

i may may have one. ill have to look for the seat belt thing.

and go and see ron at rons automotive in town as i think he has 1 sitting around or at least an odd number as he fixed 1 leaking one for a customer recently.

or go and see brad at boost as i think he sells them separately as well. i think its like $60 each and they have been cleaned.

just looked and yep i have one of thoes seat belt bits.

i am in launceston and you acn call me on 0400563199 if you wish to arrange some thing.

Link to comment
Share on other sites
SSHatch Collaborator

SSHatch

Posted
  • Author
Posted (edited)

Got on to Brad. Little bit more than $60 but he had one so thats good.

Will give you a call in regards the seat belt bit shortly. I am in Launnie pretty regular these days so should be able to grab it off you soon.

Unless you want to PM a price and I will give you a buzz the day before I head through to arrange a suitable time to meet up??

Edited by SSHatch
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • WMDC35
      Gran Turismo 7 Time trial

      By WMDC35 · Posted

      Blitz ER34 at some point hopefully, should be allowed in Gr3 if they do.
    • MBS206
      Blue Smoke from exhaust, RB25DE+T

      By MBS206 · Posted

      Stock R33 boost control, with the exhaust, and FMIC done, will boost creep. There is no tuning around it if it is the factory boost solenoid.   If it has an aftermarket electronic boost controller, the settings/mapping can be altered in it.   Oil could be anything as mentioned, however did it ever do it before you did the turbo swap? How much and how often did you drive the car before the swap?   I'm hinging on too much oil supply, or it's not draining properly.   To check, pull the air outlet off the turbo. Is it full of oil? Drop the exhaust at the turbo, does it appears to be oiled/coked? Now pull turbo and check the exhaust manifold, does it appears oiled and coked the same way?   Secondly, the PCV could even be stuffed / not functioning properly and will cause blowing of blue smoke.
    • hardsteppa
      Like loud exhausts? You could be a psychopath.

      By hardsteppa · Posted

      No "could" about it.
    • GTSBoy
      rb20de neo +t conversion - boost pressure sensor needed?

      By GTSBoy · Posted

      Almost any ECU would work, from a 30 yr old PowerFC to a new Motec/Autronic. But presumably you want new middle of the road ECU, meaning that you want a Haltech or a Link, most likely. As to which model though? I dunno. I don't keep track of what they have in their current ranges. You don't want a plug in though, because plug ins can start to cause you the same wiring issues that you have to chase up with your stock ECU/loom swaps when an engine transplant is involved. If you use a Haltech (and presumably a Link) you could put the base map for the engine in and drive it around and not even need to "tune" it. It will work just fine. I can't recommend a tuner without a location (and even then I can't recommend many, being as I never use any tuners except myself and my brother-in-law). And not many tuners are happy to remote tune. Maybe they'd be happier doing it for a basically stock setup that just needs to be demonstrated to be working properly. But even then, not being able to be with the car to see what the hell is going on and sort out the inevitable problems that will result from an engine conversion done by an amateur..... unlikely to be enthusiastic about the job. And if you think that just adding 2 wires for the boost sensor is difficult - you don't want to be trying to install and set up an aftermarket ECU. You're going to have to bite down hard on something with either approach.
    • deuceforty2
      Wiring loom difference between A31 A/T RB20DET and R32 M/T RB20DET?

      By deuceforty2 · Posted

      wired everything up and confirmed that the red with white stripe is indeed the fuel pump pin on this harness. 
×
×
  • Create New...