Jump to content
SAU Community

Recommended Posts

Hi ppl.

I am currently looking for a skyline

Most preferably Series II

either white, black, gun metal grey, dark blue or a custom colour

60000-80000 kms

manual

either stock or modded.

I would also consider an s14 200sx

series II

same kms

manual

white, blue or a custom colour.

would also consider other cars if they are in the right price range. so try your luck, you never know :P

MUST BE IN THE SYDNEY AREA.

you can PM me or email me here [email protected] or just discuss it here in the thread.

price range low 20's.

Cheers

JR

Link to comment
https://www.sau.com.au/forums/topic/24752-wtb-sell-me-your-skyline/
Share on other sites

duncan / bao2me :: price im willing to pay is dependant on the condition, years, mods and kms of the car. so just pm me / post a reply in this thread with the car details and the price youd like for it.

sil8ty :: sorry but i was really looking for a car in sydney. i dont have the time / resources to travel to inspect and transfer a car interstate.

Originally posted by ac1d3o3

duncan / bao2me :: price im willing to pay is dependant on the condition, years, mods and kms of the car. so just pm me / post a reply in this thread with the car details and the price youd like for it.

sil8ty :: sorry but i was really looking for a car in sydney. i dont have the time / resources to travel to inspect and transfer a car interstate.

[ac1d3o3 intrested in a sydney location? my GTST is for grabs due to a newborn... 2 doors, small boot ... not very handy for a family car/QUOTE]

HERE IS A PIC OF MY CAR + DETAILS.

NISSAN SKYLINE GTST R33, 1994 MODEL,

-5 SPEED MANUAL,

-ORIGINAL 17" WOLK RACING WHELS WITH NEW RUBBER FRONT AND 70% BACK,

-400R BODY KIT,

-HKS AIRPOD FILTER,

-3" STAINLESS STEEL EXHAUST ALL THE WAY THROUGH WITH JAPANESE MUFFLER,

-AUTOMETAR BOOST GAUGE, 9psi

-STEREO SYSTEM WORTH $2000+,

-QUIKTRAK SATELLITE TRACKING DEVICE AND NUMBER PLATES (WLD 33R) INCLUDED.

-MAJOR SERVICE DONE AT 100.000KM (TIMING BELT, ENG SPARK PLUGS, NEW BRAKES, OIL...)

-VERY WELL LOOKED AFTER A MUST TO INSPECT.

PRICE $22,250ono

GOTTA SELL IT SOON GUYS, DUE TO A NEWBORN, TIME 4 A FAMILY

NEED MORE PICS OR DETAILS E-MAIL ME OR CALL/SMS ME ON 0404 887 845 SYDNEY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...