Jump to content
SAU Community

Recommended Posts

hey guys.... so i have had my car back for only a week or so... r33 s1 with all bolt on mods.. everything was fine until last night i went for a spin and in 2nd there is a problem... il try describe... basically what happens is once i start full boosting at about 4500rpm (15 pound) a milli second after this back fire occurs..but its not a back fire.. or a mis fire.. it sound like a bunch of air getting dumped somwhere and i loose a few psi but then regain it straight after..its like a backfire but with boost... i tried lowering the gain and boost on my profec b ebc but still the problem occours... but only in second.. all the other gears rev out perfect.. i thought it may have somethin to do with my ext. gate... but what could it be.. all gaskets are perfect.. the gate is not old at all.. like not even 5000kms could anyone please try throw some suggestions i would be very greatful for any input.. in terms of boost i have a t04e, ext. gate, greddy profec b...so yeah.. maybe a tuning issue... but it didnt do it until last night.. plus i have just put in new coilpacks aswell brand new... so that cant be it either.. i hope not..

thanks guys..

alex

Link to comment
https://www.sau.com.au/forums/topic/247869-r33-problem-in-2nd/
Share on other sites

what ecu? turn the boost way down until you get it fixed

if stock ecu -> you need a stand alone

if aftermarket -> look at getting in retuned, keep boost way down until you fix it

sounds like its detonating

what ecu? turn the boost way down until you get it fixed

if stock ecu -> you need a stand alone

if aftermarket -> look at getting in retuned, keep boost way down until you fix it

sounds like its detonating

i have a microtech lt12s... it got tuned like a week ago... and now i took it for a spin today and it didnt do it at all.. like perfect... when you say detonating... its not like pinging or anything like that... so what would be detonating?? car isnt blowing any smoke, not using any oil... so engine is healthy... when it did it , it almost feels like a cooler pipe popping off then being put back on in a second if ya know.....BLOOODY SKYLINE!!!!!!! GRRRRRRRRRRRRRRRRRRRRRRRRRRR!!!!! I JUST REDID EVERYTHING ND NOW THIS.... FARK!!!!

thanks for your reply man..

i would check all ur cooler hose clamps just make sure everything is done up firm, nothing loose

i just put on big truck clamps and new silicon joins...absolutely no leaks what so ever... hmmm.. this one has me stumped.. it sometimes does it and other times doesnt... hmmm... it always seems to do it though if i pump 1st and into second...then it does it at about 5000rpm..... AAARRRGGGG!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...