Jump to content
SAU Community

Need To Borrow 32gtr Airpods For 5min Just To See If Mine


Recommended Posts

hey guys is there any1 that i can borrow there 32gtr podfilters from just for 5min to try them on my car to see if thats the cause of the problem? im located in dandy

u can sms me on 0422 607 113 thanks guys help much appreciated

how can pod filters be a problem for anything?

just take em off if you need to test, will work the same as swapping

i wana see if there 2 dirty and try another set to see if it makes a big difference

i wana see if there 2 dirty and try another set to see if it makes a big difference

Unless they were so blocked up that air wasnt even going through them...

You wont really notice a difference.

Totally depends on what problem you have though, but ive never heard of a dirty pod seriously degrading performance

the problem is the revs drop really low sometimes and then back up feels like its gona stall and sometimes it does stall thought maybe not getting enough air.yer i think im gona give em a clean with compressor a bit.and im taking the car down to status tuning 2morow to get checked out so they should be able too tell me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, I had ordered the spherical bushings at the same time as the rest. I have high hopes for the anti squat reduction kit. 
    • Make sure you use the spherical bushes** on the lower arms, ifyou do that. ** at least, if not the whole replacement lower arm.
    • The tap for coolant flow control will be stuck open. It's not just the air door motor that dies.
    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
×
×
  • Create New...