Jump to content
SAU Community

Recommended Posts

1995 Nissan Skyline R33 GTR V-SPEC

Dark pearl grey

Price: $22,499

Location: South eastern suburbs, Melbourne

Contact: PM or call/SMS 0416 623 381

Custom intake piping

SPLITFIRE coil packs

TRUST pod filters

TRUST timing belt

N1 water pump

New tensioner

New idler

SPOOL adjustable cam gears

XS Power stainless front pipes

JJR decat pipe

3" stainless cat back with resonator, 5” canon

High Octane racing air director

XTREME HD clutch

Lightened flywheel

Apexi Power FC

BLITZ I-D 3 SPEC R - Not installed

D1R 18 x 10 - 1 rims in black - New

NEXEN 235/40R18 tyres 90% tread

Slotted front rotors

ZEAL 10/8 adjustable coilovers

New caster rod bushes

Adjustable camber bushes

All the audio gear is new and unused, all the inside of the car is complete, just the boot needs to be completed - mount both amps and box the sub

ALPINE MRP-M500 mono-block amp

ALPINE MPR F340 V-12 4Ch amp

ALPINE CDA-9884Ei

ALPINE SWS-1223D TYPE S 12"

FOCAL 165 A1 6.5" front splits with tweeters on custom door pods

FOCAL 165 CA1 6.5" rear coaxial on custom pods

Both front doors insulated with DYNAMAT

4g amp wiring – New

300rms speaker cabling

New leather gear boot

New leather hand brake boot

New floor carpet

NISMO black chrome shift knob

OMP deep corn racing wheel

Boss kit

Fresh gearbox oil

Fresh transfer case oil

Currently makes 230kw @ 13 psi - Was tuned with the old exhaust and without the CAM gears, with the cam gears dialed in and boosted to 15 psi it should see 250kw +

Synchro in 4th gear is worn, crunches into gear on some occasions

Interior is clean, both drivers and passenger seats are mint, genuine GTR floor mats as well. Car has no rear seats as I was looking at installing a cage

Rego until 09, can supply RWC at the right price. More pictures to GENUINE buyers upon request

Will swap for a car of lesser value + cash adjustment my way

Thanks

IMG_0309.jpg

Link to comment
https://www.sau.com.au/forums/topic/248202-95-r33-gtr-v-spec-cheeeaaaaap/
Share on other sites

let me know if you willing to seperate rims i have standard. and if you want to seperate stereo. prices on both rims and steroe if seperate....

any more pics of rims and stereo

PM sent

hook me up with lots more pics! wat Km's? price negotiable without stereo? just got a call from the bank saying i have a loan approved so was just about to start looking,, was looking at 32's but might squeeze this in my budget if all good :(

just read aftermarket wheel... do you have the stock airbag wheel?

any accident history?

Edited by shy_s6
GL Abu. Free bumpage

Thanks man

hook me up with lots more pics! wat Km's? price negotiable without stereo? just got a call from the bank saying i have a loan approved so was just about to start looking,, was looking at 32's but might squeeze this in my budget if all good :(

PM sent

You asked me the same questions last time the car was up for sale, you have no intention on buying the car so stop wasting my time and fk off out of my thread

GENUINE INTEREST ONLY

PM any offers, questions or comments. I'm no longer going to respond to any comments or questions in this thread. Feel free to call/SMS or PM if your genuinely interested in BUYING not to ask me general questions

Rims on the car have been sold so price will be dropped to $22,000 with standard wheels or I am willing to drop it a little more if you want to provide your own wheels. Wouldn't mind swapping for a car of lesser value + cash adjustment my way but PM any offers and we can go from there

$ 2 2 , 0 0 0

Will also do it cheaper without audio gear

Well I've decided I would like to get rid of the car for sure and I could do with the extra cash as well so If I remove ALL the stereo gear, you provide your own wheels and I keep the BLITZ SPEC R boost controller I will let it go for $20,000 cash :)

PM if your interested, can work out a deal with other wheelswith/without stereo etc

$ 2 0 , 0 0 0 ! ?

Very interested, waiting on bloke to secure funds and take my car off my hands.

Would love some more photos, accident history, generally a bit of history of the car and how it's kept.

20k for a gtr. your crazy bro!!!!

just remember. what can replace this for the 20k your asking?

reason y i held on to mine. End of the day its a ZILLA!

on another note prople are tight asses and wont fork out the money. Hold on to her til the economy gets better

Very interested, waiting on bloke to secure funds and take my car off my hands.

Would love some more photos, accident history, generally a bit of history of the car and how it's kept.

PM sent

20k for a gtr. your crazy bro!!!!

just remember. what can replace this for the 20k your asking?

reason y i held on to mine. End of the day its a ZILLA!

on another note prople are tight asses and wont fork out the money. Hold on to her til the economy gets better

lol

It is way to cheap I know but it just sits in the garage man and will sit there for another 5 months till I can drive again. For now I could use the money for other stuff but at the end of the day, I won't let it go for nothing

but if it doesn't sell I will just keep it, either way no loss :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
×
×
  • Create New...