Jump to content
SAU Community

Recommended Posts

Designers Jae-yun Kim and Jong-Su Lee have devised a stunningly simple concept for the humble speed hump.

speedbumpconcept_thumb.jpg

The idea is simple enough: each speed bump is fitted with retractors that stay closed (flat) if a car hits it at below 30km/h, and open (bump!) if a car hits the bump at any speed over 30km/h.

Kim and Lee’s speed bump concept has been created to reward those of us who agree with the need to drive slow in residential areas, school zones, and shopping complexes, and punish those who don’t.

Source: The Motor Report

f**king great idea i reckon. will save many repairs. many shopping centers have speed humps that are just to tall. for instance i of a few that i wouldn't take my girlfriends pulsar over. and its standard 4wd height

So if u drive above the speedlimit the speed bump catapults up?? where does it detect the speed? on impact or a sensor beforehand?

hm...all up, sounds interesting, but won't ever happen in Australia.

im capped so cbf clicking the link, but is there alot of electronics involved?

you could almost achieve the same result by having a strut/shock absorber between the two halves, with the right valving, it could lay down flat (extened shock right out) at low speed, but if your going to fast, the shock wont close up fast enough and you have a bump, make sense? might need a little ramp, long and flat, leading up to the bump to assist it laying down ahead of time but meh, i'm not a civil engineer, you work out the details :)

im not too clear as to how it works...doesnt help that i skimmed it but it opens up if you hit if over 30ks which may mean you wont be ready for it when it pops up and your rears hit it and throws the car into the wall..lol I can only see this in shopping centres, big corprorate business parks the like then again you dont normally do more than 30ks in places like that anways. too many moving parts for the average road which is where speeding usually occurs plus im sure a big ass truck or two would make mice of it. good idea non the less.

Yeah, I wouldn't mind seeing them installed in carparks.

I can get in to my local Westfields, but I can't park on the roof because their metal speed humps scrape the undercarriage on my stock ride height car. A mate tore the mid muffler open on his S15 there.

Yeah, I wouldn't mind seeing them installed in carparks.

I can get in to my local Westfields, but I can't park on the roof because their metal speed humps scrape the undercarriage on my stock ride height car. A mate tore the mid muffler open on his S15 there.

must be a wesfields thing. my local one has the same problem. my mums rio/my girlfriends pulsar all scrape and are all standard height. then they put a new section in and they are even worse. seen standard 300zx rock on the sill trying to get over one.

EXCELENT IDEA! but why would the government spend $1000 on this smart speed bump (estimating here) to please a small group of enthusiests ( us ) when they can just spend $200 (again an estimate) on a slab of concrete.

it would be awsome for these things to be used but i dont think its ever going to happen.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...