Jump to content
SAU Community

Recommended Posts

Just for the record.....

$2400 isnt cheap.... considering there on special...

RPM Performance centre in adelaide do the Garrett GT30 600HP DBB with 1.06A/R for there NORMAL price of $2250.

Man i got my GT3540 1.06 for $1980...

BRAND NEW, still had Garrett factory stamping on comp cover.

http://www.rpmperformancecentre.com.au/Turbos.htm

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/page/2/#findComment-530773
Share on other sites

T3 Flange is what we want right ?? But need external gate on the manifold - means hacking existing manifiold or fabricating a new one - in which case the flange spec don't matter cause you wil be fabricating a new one anyhoo.

Sounds expensive.....

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/page/2/#findComment-530945
Share on other sites

You mean this one Jimbo ??

r33turbokit-s.jpg

That's not Merli's - I doub't Andrew would seperate :

This is the GT3040 that CGC sells - but in a package with standard (modified) manifold and external TIAL gate.

Pretty pricey - and I wouldn't use the standard manifold......

I'm a little concerened with lag - as I understand anything over about 600HP is getting up there in the lag stakes.

I suppose one could just keep the revs over 4000RPM - then no lag problem right ?

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/page/2/#findComment-530996
Share on other sites

B-man,

fyi, the two turbos which GCG list as "GSB8005A" & "GSB8006" are actually two totally different turbo cores as per Ray Hall's website. the specs are as follows;

i) GT30 (GSB8005A - 700177-0011) : Rated at 475hp

* A/R 0.70 comp housing

* 52 trim compressor wheel (TO4S - 2.17"/3.00")

* 50 lbs/min max. comp flow

* A/R 0.82 exhaust housing

* 90 trim exhaust wheel (2.11"/2.22")

ii) GT30 (GSB8006 - 700177-0014) : Rated at 600hp

* A/R 0.70 comp housing

* 64 trim compressor wheel (GT40 - 2.41"/3.22")

* 65 lbs/min max. comp flow

* A/R 1.06 exhaust housing

* 84 trim exhaust wheel (2.16"/2.36")

the 2nd unit would be what is considered the Garrett GT3040 as it uses the 64 trim compressor wheel from the GT40 family along with the A/R 1.06 exhaust housing to allow for great air/gas flow.

Any smaller exhaust housing would make it more streetable although max power would be limited due to exhaust flow restriction with the smaller housing.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/page/2/#findComment-531037
Share on other sites

No they don't, all Garrett GT30 turbos and higher are T3 exhaust flange.

The HKS GT3040 turbo uses a GT25 flange. Some HKS turbo come in T3, some with GT25, check it out here:

http://www.hksusa.com/categories/more.asp?id=1092

For those who care, this is the difference between HKS GT3040 and Garrett GT3040, HKS just Garrett parts mixed up in various combos, with proprietary housing designs:

HKS:

Rated at 500hp

* A/R 0.70 comp housing

* 50 trim compressor wheel (58mm/82mm)

* A/R 1.12 exhaust housing GT25 flange

* 84 trim exhaust wheel (60mm/55mm)

Garrett:

Rated at 550-600hp, depending on exhaust A/R

* A/R 0.7 comp housing

* 64 trim compressor wheel (61.3mm/82mm)

* A/R between 0.82-1.06 exhaust housing T3 flange

* 84 trim exhaust wheel (60mm/55mm)

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/page/2/#findComment-531458
Share on other sites

Originally posted by Freebaggin

For those who care, this is the difference between HKS GT3040 and Garrett GT3040, HKS just Garrett parts mixed up in various combos, with proprietary housing designs:

Check the number of blades and the actual design of the compressor/turbine. It's a bit more than just mix n' match from a Garrett spare parts bin.

Link to comment
https://www.sau.com.au/forums/topic/24896-gt3040/page/2/#findComment-531708
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...