Jump to content
SAU Community

Recommended Posts

ok cut a long story short, have recently just installed a KKR430 on my car, now we have been having a few problems with the KKR430 just not been up to scratch, so it's getting sent back for a new one, now they have asked me if i would like to go up to the 480 ? just wondering pro/cons with going to the 480, it will be on a R34 neo, any help would be great thanks :nyaanyaa:

KKR 430

KKR 480

p.s yes i have used the search button :rofl:

Link to comment
https://www.sau.com.au/forums/topic/249134-kkr-430-vs-kkr-480/
Share on other sites

And what didnt the search button answer exactly?

Being there is a 8+ page thread on the 480...

Being more specific might help for a better answer... otherwise i reckon the other thread will almost certainly answer your questions

from my experience there are no pros for the kkr turbos. i have had too many problems with them in such short little. such as internal wastegate jamming open, oil seals on the turbine shaft failing. i bought it brand new, and no later than 1 month, i had to send it back cause the wastegate had jammed open, was only running 14 psi. no sooner had i put it back on, within a month i had to send it back again to get the seals replaced. and only 3 months ago the seals went again, so i threw it in the rubbish and spent the money on a garrett gt3030r which is what i should have done in the first place and saved a lot of time and hassles.

i'm not saying all kkr turbos are them same. but i am not buying one ever again.

they are just cheep chinese turbos.

you get what you pay for here.

And what didnt the search button answer exactly?

Being there is a 8+ page thread on the 480...

Being more specific might help for a better answer... otherwise i reckon the other thread will almost certainly answer your questions

ok question is what one should i go with the 430 or 480, want half decent power and not heaps of lag

from my experience there are no pros for the kkr turbos. i have had too many problems with them in such short little. such as internal wastegate jamming open, oil seals on the turbine shaft failing. i bought it brand new, and no later than 1 month, i had to send it back cause the wastegate had jammed open, was only running 14 psi. no sooner had i put it back on, within a month i had to send it back again to get the seals replaced. and only 3 months ago the seals went again, so i threw it in the rubbish and spent the money on a garrett gt3030r which is what i should have done in the first place and saved a lot of time and hassles.

i'm not saying all kkr turbos are them same. but i am not buying one ever again.

they are just cheep chinese turbos.

you get what you pay for here.

if I had the money to upgrade I wouldn't be keeping mine either :nyaanyaa:

simon is correct lol shame on you

i own a kkr480 have for over a yr n half now runs 20psi daily and done over 25,000kms

but if ur not after lagg then i wouldnt get one i dont see 20psi until around 4500rpm or bit later

and they are only good for around 240-250rwkw which isnt much power at all....

sell it and get a decent turbo! cause ur only gonna run into more troubles there biggest one wastegate issues.

simon is correct lol shame on you

i own a kkr480 have for over a yr n half now runs 20psi daily and done over 25,000kms

but if ur not after lagg then i wouldnt get one i dont see 20psi until around 4500rpm or bit later

and they are only good for around 240-250rwkw which isnt much power at all....

sell it and get a decent turbo! cause ur only gonna run into more troubles there biggest one wastegate issues.

haha would love to sell it and not use one :( but as not having much money at the moment sort of restricts what i can do cos i have to change the dump etc over again and that's gonna cost more money :(

decent power & not much lag & KKR turbocharger

is a contradiction

sell the turbocharger and buy a well proven unit

HKS 2530, HKS GT-RS, Garrett (many equivs), and so on...

sorry but you wont get what you want with the KKR range

and the 480 will have more lag (ie; larger housing and wheels)

I have a KKR 480 (on a RB25DET), and it sucks arse. I'd be looking maybe a Holset or a Garrett replacement for mine, and given that even highflows can make around the same power as these, why would you bother?

Surely you'd almost be going backwards with a NEO motor and one of these turbos as well!

from my experience there are no pros for the kkr turbos. i have had too many problems with them in such short little. such as internal wastegate jamming open, oil seals on the turbine shaft failing. i bought it brand new, and no later than 1 month, i had to send it back cause the wastegate had jammed open, was only running 14 psi. no sooner had i put it back on, within a month i had to send it back again to get the seals replaced. and only 3 months ago the seals went again, so i threw it in the rubbish and spent the money on a garrett gt3030r which is what i should have done in the first place and saved a lot of time and hassles.

i'm not saying all kkr turbos are them same. but i am not buying one ever again.

they are just cheep chinese turbos.

you get what you pay for here.

did you get it from ebay or otomoto and how much did you pay

well found out why the turbo was *extra* crappy the waste gate hole was like a 16mm but ment to be like 25mm ?

like i said before i *know* they are not that good but with not much funds atm ;) gotta make do with what i can

only place that sell genuine kkr turbo's is otomoto all them ebay stores are ripoff's which = junk that will fall apart/break in first few weeks/months

From my experience with the kkr's, the ottomoto ones aren't any better. I replaced a new one one twice whilst on the dyno, and it required extensive mods to make it hold boost.

did you get it from ebay or otomoto and how much did you pay

i got it from otomoto and i think for memory i paid around $1000 that was for turbo and the dump pipe to suit rb25det. i had kkr 480 and they are so laggy its funny. seriously.

i have heard some good things about them but probaly more bad there must just be some lucky peaple that get the good ones

yeah i hear very mixed results about them :P

i got it from otomoto and i think for memory i paid around $1000 that was for turbo and the dump pipe to suit rb25det. i had kkr 480 and they are so laggy its funny. seriously.

yeah think i might just stay with the 430 for the time been ;)

From my experience with the kkr's, the ottomoto ones aren't any better. I replaced a new one one twice whilst on the dyno, and it required extensive mods to make it hold boost.

yes holding boost is there bad factor aswell as being very laggy and not making that good of power..

best bet is to run a 50mm external gate straight off the scroll then u wont have any dramas

there a cheap turbo for 250rwkw though but id go a gt35r or gt30 anyday over it if i had the chance again lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...