Jump to content
SAU Community

Recommended Posts

hi guys somehow have misplaced my rays lock nut key

need to get wheels off at centreline and was wondering if anyone could lend it to me to drop it off to chris for a few days

i need it done by 2moro latest if you can, or if u want me to pickup to borrow if thats an opton

but needs to be close to northern burbs if possible

Cheers Nick

Link to comment
https://www.sau.com.au/forums/topic/249226-rays-lock-nut-key-needed/
Share on other sites

I'm guessing thats what you called me for....was sleeping..

You can try mine I guess, but you'd have to pick it up from me at work tomorrow at 10am...

lol yeh thats wat i called for

where bouts is work for u?

Each set of nuts has a slightly different lock nut, with a number on the end. The small bit sticking out is in a different position on each locknut.

yeh knew each were different

but i had 2 sets a black set and my red set and both lock nuts keys fitted both sets

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • Do you have any before and after photos? That's $200 just for the hydro blasting?
    • It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...