Jump to content
SAU Community

Guilt-toy Installs Vipec V44 Plug In.. & Base Tuned

Guilt-Toy

By Guilt-Toy,
in Engines & Forced Induction

 Share

Recommended Posts

  • Replies 155
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

BoostedBarge Rising Star

BoostedBarge

Posted
Posted

Yes, you can use the wiring for the stock boost solenoid. Mine has been wired up with spade connectors straight into the stock boost solenoid plug :(

You will need to change the way the tubes to the mac valve are set up, though.

SECURITY Grand Master

SECURITY

Posted
Posted

well ive only got to choose from 1 black and 1 white wire to connect the wires from the MAC valve (which both wires are black). i dont know which one to connect to which. the wiring diagram only had the colours that come from the ecu which are LG and L/W.

and i still dont know which wires from the mac valve are + and -

BoostedBarge Rising Star

BoostedBarge

Posted
Posted

I just went and had a look at mine for you. Both wires on the Mac valve are black, but it looks like one has writing on it. I also saw '---', so I guess that one is the negative. The stock BC connector is a rectangle shape with the connectors in a T sort of layout. The connector that is at one end of the rectangle connector is the negative. The one that runs down the centre of the 'rectangle' is the positive. I hope that makes sense.

Guilt-Toy Grand Master

Guilt-Toy

Posted
  • Author
Posted
OK, well there ya go then. That would explain why the wires are both black :D

yeah it confused me at first.. just like injectors.. they don't have + or -

you learn something every day ;) .. dunno what i have learnt yet though :)

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
yeah it confused me at first.. just injectors.. they don't have + or -

you learn something every day :D .. dunno what i have learnt yet though ;)

Yes you have...

That DiRT is a tightass and wont spend coin on a wideband

Guilt-Toy Grand Master

Guilt-Toy

Posted
  • Author
Posted
Yes you have...

That DiRT is a tightass and wont spend coin on a wideband

If i am tuning it then you are going to have to have a wideband sensor. Simple.

Guilt-Toy Grand Master

Guilt-Toy

Posted
  • Author
Posted
Anthony, get him to pull the one out of your car, then he can put it back when your done?

No.

I win. he purchased one :D I want to setup Open Loop correction on his car.. big $$ engine would be good to have some insurance when he is at power cruise

TiTAN Grand Master

TiTAN

Posted
Posted (edited)

his o2 sensor is more in the front half than the rear end doof :D

Anthony would you mind PM'ing me with a basic run down of setting up antilag and cyclic idle. Did the fuel map need to be changed at all?

Edited by TiTAN
Guilt-Toy Grand Master

Guilt-Toy

Posted
  • Author
Posted
good thing I don't tune my own car then...

either way... the heart-break is still there...

hey ive tuned your car!!.. Twice! Stop your whinging!

& No can do Titan.. you got stock turbo.. i am guessing it would break on your first anti lag.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
×
×
  • Create New...