Defect Help

[frozenwaffles]

full outside rolling diametre and while you are there please the width of the tyre please...

[sneki81]

ok, let me know if i havnt done this right and ill do it again. i got a piece of rope and measured around the outside of the rim(not tyre included). it measured 1400mm. the tyres i have on are front- 205/55r16, back- 225/50r16. tyres were only just put on when i bought it so i dont know if they are the standard size. the rims are though.

[frozenwaffles]

sorry dude, not after the circumference, just the diametre, so in a straight line from the front of the tyre to the rear of the tyre...(cant measure top to bottom with the weight of the car on it...)

[sneki81]

my bad. 625mm

thats with the tyre included

Edited December 21, 2008 by sneki81

[Kinks]

http://www.1010tires.com/tiresizecalculator.asp

lets you compare standard size to your size in a snap. R33 tyres are 205/55/16 or 225/50/16.

[JunglBoi]

it should be... something like

u can make the rim size 1 size larger...as long as the profile is 1 size smaller kinda thing

and i think u can make it like an inch bigger than normal

so say a 16inch rim with 3 inch profile on each side of the rim

u can get 18 inch rims as long as its 2inch profile on each side of the rim

if that makes sense

and yeh i got 81 fines for each defect

but didnt get done for my turbo timer

but i think they figured it awsnt such a bad deal after already giving me 10 defects

LOLS

it was quite funny

because there was only enough room to write out 9 defects so he wrote it in the lil corner at the top

LOLS

Edited December 22, 2008 by JunglBoi