Jump to content
SAU Community

Decent Auto Transmission Specialists Brisbane (or Toowoomba)


Recommended Posts

Hey guys my R33 GTST Series 1, 4speed Auto gearbox has shat itself out in the middle of bum*&k nowhere! It was bound to happen sooner or later as the car has been slightly modified (pod, boost t (12psi), intercooler, bov, exhaust etc), but nothing too mad and it was the stock 4speed auto (145,000km). I need to know some decent auto specialists in either brisbane (or toowoomba at the worst) as i will be getting the car freighted back asap after boxing day. Need someone to look at it pretty quickly so i can get it assessed and quoted, as i will be heading away for work on the 30th of december and hopefully get the work done while im away! Oh and p.s any recommendations on whether a reconed, strengthened 4speed would be the best (not cheap) quick fix, because i dont have the cash or time atm to attempt a manual conversion?

Any help would be awsome,

Cheers Brendan

Im also looking into transmission workshops at the moment, although I havnt had any dealings with them, will either go with:

http://www.aspleyautos.com.au/autoframe.htm

http://www.wsautomatics.com.au/extreme/re4ro1a_re4ro3a.php

ive heard west side are pretty decent.

my box recently shit itself.

i found the cheapest option was buying another auto box and put that in.

if you look around people usually sell them for $200ish if you get lucky.

It then cost me $796 to have my old trans removed, shift kitted valvebody removed and cleaned and swapped into new transmission and new transmission installed.

so $1000 all up.

would be cheaper without all the valvebody messing around

This work was done by bob grant autos in coorparoo.

guys seemed pretty decent. try and speak to gary if you can though. he always seemed more helpful.

  • 3 weeks later...
  • 5 months later...
For those of you in SE Qld I just got a quote of $595.00 +gst from Western Suburbs Automatics at Rocklea to have a shift kit installed in my series 2

Was that $595+ GST drive-in-drive-out with service? I'm looking at getting my R34 shift kitted and service, and probably upgrade the transmission cooler. I work in Coopers Plains so something a bit more local is definitely ideal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...