Jump to content
SAU Community

R32 Gtr Gearbox

GTRBOS
 Share

Recommended Posts

GTRBOS Mentor

GTRBOS

Posted
Posted

hi guys up for sale i got a damaged gearbox that will suit a rebuild, i think may be good for parts, i was driving this car in my ownership for 3years and just decided to let go on me, 4th gear just started crunching about 2months ago, on high revs 3rd gear would be a problem most of the time, last night went out in the gtr, took off and we snapped in 3rd gear and there was no 3rd then we tried going to 4th there was also no 4th, only gears we used to get home were 1st 2nd and 5th, now just went into the garage and strated the gtr and gearstick is stuck in 3rd gear and doesnt want to come out, gearbox is still in the car so any inspection is welcome, im about to purchase a r33 gtr gearbox for the car so all this would be doing just takiing room and making a mess in the garage

NOTE- GEARBOX WILL NEED A REBUILD OR CAN USE PARTS OT OF IT BUT I DONT SEE WHY YOU WOULD

price $280

located in melbourne northern suburbs

cheers tony

Link to comment
https://www.sau.com.au/forums/topic/250193-r32-gtr-gearbox/
Share on other sites
GTRBOS Mentor

GTRBOS

Posted
  • Author
Posted
Interested in buying a stuffed box for some parts. cost to freight to brisbane?

hey mate pm me your postcode and i will chase it up for you but i seriously dont think it wil be cheap to send off mate as itrs really heavy, anyway pm me your details and a contact

cheers tony

Link to comment
https://www.sau.com.au/forums/topic/250193-r32-gtr-gearbox/#findComment-4341256
Share on other sites
  • 2 weeks later...
GTRBOS Mentor

GTRBOS

Posted
  • Author
Posted (edited)

hey guys this gearbos is still available but one of the parts has been taken out and sold sepertaly so will sell the box for $180, and from my mechanics point the folks or something are stuufesd in the box but it is very good to use for parts or to rebuild,

the part that has been sold is the plate that the main shaft goes through and covers the bearings inside the bellhousing, the one that also mounts the pivot bolt or else everything is there

NEED IT GONE

cheer tony

Edited by GTRBOS
Link to comment
https://www.sau.com.au/forums/topic/250193-r32-gtr-gearbox/#findComment-4360284
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...