Jump to content
SAU Community

Recommended Posts

yeh well i sorta have......

Once i pay my fines its all over, so i'm going to work it out that i loose my license on monday!!!

Yeh whats the worst they can do, give me a fine and take away 6pts :( In three months time i will be back on 12 :D

Oh BTW, i found out that i have only been running 5-7psi of boost :D Took teh car to RMS and they sorted it out and now i'm back to the stock level of about 15psi

Its a whole new car!!

docile. if you have more than 12 accumulated points then you will find that when you get your license back the extra points will have been deducted off the 12, my son lost his for three months and when he got it back he had already lost 10 and has been sitting on 2 points since,[ he lost a lot in a short time after after he hit 12 but before they took it away.... ] chris

cool, looks like it might be a half decent turn out. If Anyone see's a stock black rex, come say hello!!

Paul, in three months it WILL be heaps faster!!! :P

PSIKO, nah i have an XF Falcon which was going have a worked 351 conversion to run 10 seconds. Instead i bought the wrx and the XF is sitting in the garage.

JIMIH, I saw you and FIST at the top car park at scabs on sunday night. We were going to come say g'day, untill our "mate" in that red r33 came into the carpark and started being stupid :)

Chrisroi, thats the first i've heard about that!! :) Ohh well there goes ANOTHER few points.

When i get my license back, i'll just try to bring as little attention to myself as possible. I'm getting a permit for as much stuff as i can, bugger them giving me a yellow for something simple like a POD

Originally posted by docile

JIMIH, I saw you and FIST at the top car park at scabs on sunday night. We were going to come say g'day, untill our "mate" in that red r33 came into the carpark and started being stupid :)

Chrisroi, thats the first i've heard about that!! :) Ohh well there goes ANOTHER few points.

hehe ahhh the "drifter" ?? :)

mate you should have come and said g'day ... that dude in the black Monaro ended up coming and talking to us and showed us his car.

On the other point, I lost my license for speeding when I was sitting on 11 points. I got pulled over and given a fine for 4 points.

But when I got my license back, I had all 12 again :) So you might get lucky like me!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...