Jump to content
SAU Community

Recommended Posts

well im looking at buying a silvia, most of the nice ones are running external gates.

is there any point hiding them? abviously the coppa will know you got 1 just from the sound but if he cant see it and its hidden by bolted down panels and stuff can he still get you for it?

how bad are the fines? i heard its classified as having no cat, so it can be a fine of like 10grand. and if you got 1, wat can u do to pass it over the pits, change the whole exhaust manifold and turbo? then u wud need a new tune and end up costing an arm and a leg.

and if u get caught with 1, do u get the fine on the spot or do they give u a few weeks to get rid of it and take it over the pits?

so wat i dont get it why so many street cars are running external gates risking like a 10grand fine... i must be missing something here

Link to comment
https://www.sau.com.au/forums/topic/250483-external-gates-in-wa/
Share on other sites

I dont live in WA so I dont know the exact laws but if the External Gate is engineered, plumbed back into the exhaust BEFORE the cat then I think it would be legal. If it is plumbed into exhaust after the cat or it just vents to the atmosphere (Screamer pipe) then it is illegal.

Who ever told you that is talking shit. External wastegates are the same as internal wastegates, only not part of the turbo. As long as it is plumbed back into the exhaust before the cat the exhaust gasses still pass through, therefore no extra emmisions are released.

A screamer pipe (vent to atmosphere) is illegal for 2 reasons. 1: Extra emmisions. 2: Noise. Sounds great though :D

They can yellow you for it, but I doubt they're fine you for it. I know plenty of people who have been stickered for having no cats, decat pipes, some have even gone over the pits like that. They fail, but it just means they dont get rid of the sitcker.

open gates are definitely illegal but those that are plumbed back before the cat are legal. cops will still sticker you for weird reasons but if you bring it to the pits they will pass. is there something about noise levels as well? some say that it cant be too loud.

There is a law saying it cant be too loud, however SN1P3R's car passed the pits 3 times with her exhaust before she got stickered for it being too loud. My exhaust has no turbo, cat, or any real muffler, and the resonator and cannon do sweet f**k all to muffle the sound. Therefore, you can hear it 3 streets away at high RPM. I am yet to be stickered for my OBVIOUSLY illegal exhaust.

There is a law saying it cant be too loud, however SN1P3R's car passed the pits 3 times with her exhaust before she got stickered for it being too loud. My exhaust has no turbo, cat, or any real muffler, and the resonator and cannon do sweet f**k all to muffle the sound. Therefore, you can hear it 3 streets away at high RPM. I am yet to be stickered for my OBVIOUSLY illegal exhaust.

dunno if its a good idea advertising how illegal your car is :spank:

as far as i know, they are not illegal as long as they are plumbed back.

dunno if its a good idea advertising how illegal your car is :devil:

as far as i know, they are not illegal as long as they are plumbed back.

Don't worry, I knew the risk I was taking when I wrote that. Simple cat swap and silencer and it's legal again.

ossie 21 has an engineered external gate

so they are legal if they dont vent to atmosphere

afaik they only do emissions testing over east, thats why people often pass the pits with gutted cats etc

:cheers:

They do emissions testing over here now, I had to get that done for my car. Apparently I got in just in time because they were looking at making people do something called the IM240 test (i think thats what its called), which only 1 place in Perth can do, and the cost was in the region of a grand :) BUT...since then I haven't heard much about that happening to people so I'm not sure if that's what people are having to do or just if the DPI were looking into it, I just did the test that is done for compliance to the australian design rule (39 I think it refers to) :)

external gates are legal if plumbed back before cat

however if its not and you have a after market comp you can set your comp to rev limit at 4k and loosen off a cooler pipe clamp so u got boost leak and say to the pits inspector its on run in tune due to being a fresh engine. The wastegate wouldnt open due to not reaching the boost limit hence you would be able to take the gate off and block the gate flange so they dont know you have one which would be legal..... or

just plumb it back, but that costs u money rather than 10mins of buggering around to trick them hahahaaa

By telling them you have an aftermarket comp you are screwing yourself over with them :) That won't work, you just have to have it plumbed back.

don tell em bout the aftermarket comp just a limiter on the coil leads or summin hahaaa they don no much theyre all generally old and carby experts hahaa

but yeah i agree just plumb it back if u get stickered but till then it sounds good loud :(

When my S13 was stickered I was caught going over the pits in the middle of their pay dispute. As a silent protest to DPI pit inspectors were sending all modified cars out with "Seek technical section approval" noted on all work orders.

I had to fill out a comprehensive application to the DPI Tech Section at Welshpool requesting approval for my high mount, gate, bigger brakes, exhaust etc etc. It was time consuming and agonising but at the end of the day I got approval for everything and not only did I get permits but I also had a full history outlining that my car was 100% legal.

If your going for a car that has an external gate why not look into requesting approval from DPI before waiting for a yellow sticker. At least if your pulled over in the mean time you can show the jellyback that your making an effort.

I'm planning to do that with my R34 now it's externally gated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Remove it. Certainly from the hub face. I'm not in love with leaving it on the wheel assembly surface either - but if it is common to do so, then....maybe fair enough. It's not difficult. Just time consuming. For the hub face you just need a large enough block and suitable grades of abrasive paper to get it off flat. The same would be true of the assembly face. Just more time consuming, probably needing a lot more care. It's defo going to be easier just to assemble the wheels as is, seal them up, and check them periodically to see if there's any movement or loosening of the fasteners, than it will be to remove it though.
    • Hello, I got my wheels powder coated and they've powder coated bloody everything the mating surface and hub (even told them not to lol) anyway should I leave it or remove it. (Would be very hard) I've searched a lot and lots of powder coaters don't mask the mating surface but do mask the hub surface. How bad it powder coat on the mating surface or hub? My question is what should I do?
    • Yeah, R34 with RB25DE likely has a 4AX01 box in it, which is a medium duty auto ~ with the RB25DET mill, it would've been fitted with 4AX00 (4AX13) heavy duty build (same case, different internals). An RB25DET will lunch on a medium duty 4R01 auto in pretty short order ...to give you some visual idea of differences between the 'medium' and 'heavy duty' boxes, you only have to look at the 2/4 band for comparison...it's chalk and cheese...(plus bigger high clutch, extra pinion in the planetary sets, higher oil pump output, different bearings, higher TC stall speed )... You can control them with just about any aftermarket TCU for electric-over 4-speed with TC lockup clutch (ie; the GM 4L60E and others)...I have a custom standalone TCU that includes MAP sensor (for turbo applications) along with TPS, RPM, and line pressure monitoring...in other words, I don't use any ECU signals...no real need to.
    • If you want to do the wiring, the GTT engine ecu has the same pinouts extra that the seperate TCM in the NA car has. You can literally grab the wires/pins that lead into the Seperate TCM and wire them into the corresponding pins in the GTT Engine ECU. You could then in theory Nistune it. I realised this when everyone put it in the too hard basket and I actually looked at the f**kin R34 manual. This is after I had previously had a seperate aftermarket TCM controller in my original N/A chassis car and a very built gearbox from a GTT, running a seperate Haltech engine ECU. I ran into this issue when I re-shelled the car into a GTT shell, so my aftermarket TCM was no longer plug and play, because the loom/modules were not present. I was pretty livid when realizing just how simple the original fix actually was. It sat for 3+ years at various workshops trying to find a solution. In practice none of this is a worthwhile idea for a lot of reasons, generally surrounding the shitness of the NA auto, the autos in general that come with skylines, and the NA engine and lack of gains. The gearbox is specced for the 2.5L N/A and barely at that level. If you have to pay anyone any money to do any of this, that is money spent on manualizing the car and it's not even close in terms of a comparison. Learning to drive manual is simpler than going through the pain of dealing with the N/A gearbox and he'll have fun to boot.
×
×
  • Create New...