Jump to content
SAU Community

Recommended Posts

Ok guys i know I'm probably gonna get flamed for this but I've searched and havn't been able to find a straight answer..

I finally got sick of the Pioneer headunit which came in the Stagea which was in Japanese and CD player didn't work. So for Christmas my misses said she would buy me a new headunit so I took the risk and purchased a cheap Eonon E1012 DVD head unit which i got around to installing today and seems to work fine and for a close to $300 if i get 12months out of it I'm not complaining.

PIC_0001.jpg

PIC_0002.jpg

Radio is able to pickup stations fine but as soon as i start driving it drops in and out or has interfearance. All wires are wired up ok except for a blue wire which has a tag that says something about antenna on it. Is this wire ok to connect to the amp control wire on the headunit? Does it require a fuse for safety of doing damage to my headunit or should i connect it to something else?

Edited by SHIZNT
Link to comment
https://www.sau.com.au/forums/topic/250858-crap-radio-reception/
Share on other sites

where did you get this from? i have been looking for cheap touch screen h/u for a while... as for the blue antenna wire, i wired it up to the antenna amp, the radio reception was 100x better, altho i have only one of the two working at the moment.

where did you get this from? i have been looking for cheap touch screen h/u for a while... as for the blue antenna wire, i wired it up to the antenna amp, the radio reception was 100x better, altho i have only one of the two working at the moment.

Got it off eBay mate.. so you wired the blue wire up to the aeropro antenna amp?

Just went and pulled the headunit back out and i have a AERPRO FM Expander which connects back the the loom with the yellow/black wire. From the AERPRO FM Expander i have a red wire which connects to the antenna wire on the back of my headunit.

The wire which connects to nothing is a blue wire with two connecters off it that has a tag that says something along the lines of:

System control (Male Connector)

Auto Antenna (Female Connector)

Now should i snip the female connecter off and hard wire it to my Amp remote wire on my headunit? Will these fix my reception issues?

Think i might have just fixed it...

I tried connecting the Amp remote wire to the blue wire to see if it would power up the antenna and improve reception but no difference..

Then i noticed i have an adapter that the Japanese 2 prong aerial connects to which converts to the normal single prong that goes in the FM Expander...

At the moment I'm at work and the car is parked in a underground multilevel car park... I turned the headunit on running through the FM Expander still.. no reception... removed the adapter from the FM Expander and plugged it directly into the back of the headunit.. turned it back on and BINGO! Nearly perfect reception.. Its still not 100% but thats most likely due to all the concrete being in the underground parking.. Will see how its goes on the way home..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
×
×
  • Create New...