Jump to content
SAU Community

Recommended Posts

hey guys and girls that have a 32 could they please tell me/take a pic of what is written on your wheel and tyre plark, you know the badge that has the rim size and tyre size that is prob on the driver side door,

thanks

also where would i find a high level stop light

how do i get proof that says that my car doesnt come with a air bag, i dont think they will do the hard work in calling nissan

are oil coolers and oil relocation alloud

also my bride seats, how do i prove that they are adr approved, well i guess they are as they recline, use orginal mounting

thanks

Edited by Flash89
Link to comment
https://www.sau.com.au/forums/topic/251148-some-help-i-need-to-get-yellow-off/
Share on other sites

Tyre plark you can get from Nissan.

If they said you can't have the oil relocator/cooler then take it off.

High level stop light you can get from autoone or superchump. 'Narva' make them, they aren't pretty but they work.

your seats should have come with a certificate or something.

If they are picking on seats that recline and use original mountings then take the car to another inspector. Supercheap is your friend for the light and tyre sticker you could prob get at any engineer, Phil's mechanical Services is good and hes pretty laid back, prob be able to give you some good advice

both my 32's came with headvisor that had a Airbag warning, neither of them actually had airbags. Airbag light will flash when you start it if it used to have air bags also look in the fuse box to see if there is a fuse of some sort. airbags in 32's are rare as.

what size wheels are you running? I used to have 205 55 16s and 215 55 16s, if u have 15's u should run a 205 65 15 (comodore and falcon spec) but legally you are aloud 2 rim sizes larger from factory. I havnt seen a 15 on a skyline before tho, 16's are the smallest i seen, cos the space saver is sized and profiled to meet a 16" with 205 55 height, but ul be able to get a sticker from nissan if u provide a chassis number, there not expensive, like 15 bucks abouts id say, prob ex japan tho but u never no. Call northside nissan.

Edited by BANGN
both my 32's came with headvisor that had a Airbag warning, neither of them actually had airbags. Airbag light will flash when you start it if it used to have air bags also look in the fuse box to see if there is a fuse of some sort. airbags in 32's are rare as.

what size wheels are you running? I used to have 205 55 16s and 215 55 16s, if u have 15's u should run a 205 65 15 (comodore and falcon spec) but legally you are aloud 2 rim sizes larger from factory. I havnt seen a 15 on a skyline before tho, 16's are the smallest i seen, cos the space saver is sized and profiled to meet a 16" with 205 55 height, but ul be able to get a sticker from nissan if u provide a chassis number, there not expensive, like 15 bucks abouts id say, prob ex japan tho but u never no. Call northside nissan.

I got told when I took my Z over the pit that they were moving to the rolling diameter rule instead of the old 2 inches thing. Maybe something to check up on.

Edited by monk_13
  • 2 weeks later...

could someone please just take a pic of their sticker that they have on their 32 gts-t. went through nissan, and its pretty much just a sticker and its got to come from japan going to take 3-4 weeks and cost me 7.95 hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...