Jump to content
SAU Community

R32 Gtr Cams + Buckets, 32 Coupe Gts-t Wrecking

Dabro
 Share

Recommended Posts

Dabro Collaborator

Dabro

Posted
Posted

32 GTR Parts

Cams and Buckets good condition $350

AFM x2 Were working sweet when removed $50 each

Wrecking damaged R32 GTS-T Coupe. Keeping running gear for GTS conversion, most other parts available.

PM for what you need and I will try to help.

Complete RB25-DE engine with flywheel and low Km's clutch $1250. Runs sweet, doesnt smoke. Approx 170,000km's Has weaping welsh

plug under exhaust manifold that needs changing. Non VVT. No injectors or rail.

Bare RB20DET head $100

RB20DET bottom end in Pieces, has one melted piston. $200 Crank and cylinder bores ok from memory.

Ignition crank angle sensor $80

PM any questions

Thanks

Perrin

Dabro Collaborator

Dabro

Posted
  • Author
Posted
igniter for rb20?

I think so, are they not all the same? I have swapped a GTR one with a GTST before with no prob's.

Anyway yeah I think I have one, will look for you.

Dabro Collaborator

Dabro

Posted
  • Author
Posted
where u from? got a front bar in good condition and what kind? what colour?

yeah got one, its wine red. I am in sydney west. $100 Will need to look at it I think it has minor damage to R/H side at mount near wheel arch.

Dabro Collaborator

Dabro

Posted
  • Author
Posted

Just remembered the wrecked car has lowered king springs (50 or 60mm) and near new bilsteins in the front, only done a couple of thousand km's.

they are quite hard I didn't like them on the street. Will take pics

Excess Proficient

Excess

Posted
Posted
I think so, are they not all the same? I have swapped a GTR one with a GTST before with no prob's.

Anyway yeah I think I have one, will look for you.

yea as long as it works , thanks

Dabro Collaborator

Dabro

Posted
  • Author
Posted

All,

I am going away for a week from tomorrow. Answer to all questions and PM's so far is yes everthing asked for is available.except I'm not to sure on what the projector headlights are. These have a rectangular inner light and a round style outer light. It is a 94 model car if that helps.

I will answer all PM's when I get back and if you are still interested I can start stripping parts on the weekend of the 17-18th

Cheers

Perrin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...