Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

China/Jap/Brand/NoName?

depends dude, how much you want to pay and do you have a budget and what do you want to do in the future?

you have a workshop carrying out your work, that's why they're there, ask them dude they'll give you great advice

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/#findComment-4351974
Share on other sites

China/Jap/Brand/NoName?

depends dude, how much you want to pay and do you have a budget and what do you want to do in the future?

you have a workshop carrying out your work, that's why they're there, ask them dude they'll give you great advice

he told me 2 grand thats why im still lookin around

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/#findComment-4351986
Share on other sites

heyy i got my car dyno last week all i got is a 3inch cat bak zorst pod and 12 psi

how much power do you want?

- Finish exhaust (dump pipe and front pipe) + remove cat or buy highflow cat

- FMIC kit

- safc or similar (depends how much u want to spend, cheap go piggyback aka safc, lots go full aftermarket $$$ or ROM-tune of stock ecu)

- fuel pump (really only needed if yours is old and not working the best)

- Rb25 turbo

then retune, the rb25 turbo will give you relatively good power without too much lag.

to reduce cost fit the items yourself, to help keep cost down you can buy china brand fmic, exhaust parts the difference between china and brand name is relatively small in those parts

enjoy and drive safe

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/#findComment-4351993
Share on other sites

how much power do you want?

- Finish exhaust (dump pipe and front pipe) + remove cat or buy highflow cat

- FMIC kit

- safc or similar (depends how much u want to spend, cheap go piggyback aka safc, lots go full aftermarket $$$ or ROM-tune of stock ecu)

- fuel pump (really only needed if yours is old and not working the best)

- Rb25 turbo

then retune, the rb25 turbo will give you relatively good power without too much lag.

to reduce cost fit the items yourself, to help keep cost down you can buy china brand fmic, exhaust parts the difference between china and brand name is relatively small in those parts

my goal is around 260 hp atw

enjoy and drive safe

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/#findComment-4352000
Share on other sites

my goal is around 260 hp atw

the rb25 turbo should get you close to that, and is the best price turbo to get you around that power ($200-$500), or else you could look at something like a hks gt2510 or gt2530

give this topic a read

http://www.skylinesaustralia.com/forums/Rb...no-t103095.html

mods + power for rb20det should give u a fair idea what you can make with that mods

Edited by [Michael]
Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/#findComment-4352008
Share on other sites

the rb25 turbo should get you close to that, and is the best price turbo to get you around that power ($200-$500), or else you could look at something like a hks gt2510 or gt2530

give this topic a read

http://www.skylinesaustralia.com/forums/Rb...no-t103095.html

mods + power for rb20det should give u a fair idea what you can make with that mods

thanks for ur help bro my goal is too hav a low 13 sec street car

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/#findComment-4352012
Share on other sites

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

Edited by hoony
Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/#findComment-4352031
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...