Jump to content
SAU Community

Recommended Posts

  • Replies 145
  • Created
  • Last Reply

Top Posters In This Topic

hehe ... Dr_Drift was right ... ".. Either break or be very fast" ...

First run was a bit weak ... i was scared to heat the tyres as my first time on slicks and first time driving the car above 110km/h.

So 1st run was crapola .. well, a great time for a GTSt, but RB26 with twin 420hp turbo's and it looks like i can't drive or the car is running poorly (and well the car is running well)

2nd run and heated tyres up well (playing around with the line-lock kit on the water strip) ... and waited for the slow assed but damn nice looking Supra to launch, then 8,500 rpm .. fed the clutch until it clamped a little .. and dropped it ... pulled very hard for about 1 metre, then snapped the axle and i slowed to take a right and parked on the grass.

Simply fix by Benny on Sunday .. the part was much cheaper than another box (poor BMT GTR...) however I would like to actually get a 1.5 mill gasket as the standard one is not holding the heat in very well...

A great learning experience with this baby ... and will not be running American Racer slicks until I can crack a good time while we run low boost.... just need to get that 60ft time down and keep changin' .. the rest is up to Endless :)

A good time? .. I'm hoping to crack 11.5 beofre upping boost. .. but who knows?

I made 12.14 on a hot day at Heathcote in my old R33GTSt, and Endless makes that almost feel like a stock GTSt ... well almost :P

Stay tuned. I might even take my Oyabun Ceffy out next meet :)

Fair call RedR32...

Why?

1) I had them.

2) I thought stock tyres would be a waste of time until I get some experience with a laggy RWD and triple plate clutch.

3) By previous experiences ...my first run in the old R33 spun the wheels from start to finish (yes, slightly crossed up over the 1/4 mile line :P) .. can achieve great mph, but 1/4 mile time is the real measure here right?

4) Because now I know how strong a GTSt is..

Next time I'll use these old semi-slick advans (street radials i'm pretty sure) .... I hope to afford nitto's when the car is ready to be boosted higher.

It's okay .. not much ego riding on this car breaking records, however it would be nice :) ... tried to calm my nerves early in the evening by writing 'RH12' on my windscreen ... not many people laughed with me though :)

Cheers,

Oyabun

Originally posted by RedR32

Thats a good time for its first time out, and the MPH shows there is more in the car. But why would you run full drag slicks, and not warm them up? If they didnt think the driveline was up to the task, why put them on?

Fairy nuff!

So when r u running it next?

PS - Snapping an axle... F#$k... Which side?

matt

Originally posted by Dr_Drift

Matt - It only had one pass, we wound the boost back to 1.2 and we're just testing... first launch snapped the axle :P

Cheers Matt ..

snapped the left side ... i'll post some pics tonight if I've time....

why come down yourself and try to crack the 11's too!.. would be nice to have a little hybrid competition there ...

yeah, EndlessR32 Has lost the sleeper look I had in my old R33 ... (now owned by Jet33). It is pretty cool to rock up in a stock looking red r33 and pull close to flat 12 with low 11's mph :D

dunno when running next ... i guess will be next calder meet.

I was expecting time for only a few runs at calder though, so came out hard on the 2nd run ... only to see some of the others get up to 9 runs in the evening!

And that's exactly why I ain't running slicks! Ouch :D

Yeah, I've got nittos to run on, so when I get my new clutch I'll be going out to see if I can run mid-low 11's. On street tyres there sweet f/a traction below 120km/h (or a bit into 3rd gear)....

Ahh well, good luck with that... As you said, stay off slicks for a while and see what she'll do on nittos.

matt

Originally posted by Oyabun

Cheers Matt ..

snapped the left side ... i'll post some pics tonight if I've time....

why come down yourself and try to crack the 11's too!.. would be nice to have a little hybrid competition there ...

yeah, EndlessR32 Has lost the sleeper look I had in my old R33 ... (now owned by Jet33).  It is pretty cool to rock up in a stock looking red r33 and pull close to flat 12 with low 11's mph :D

dunno when running next ... i guess will be next calder meet.

I was expecting time for only a few runs at calder though, so came out hard on the 2nd run ... only to see some of the others get up to 9 runs in the evening!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...