Jump to content
SAU Community

failed window guides?-bad scratches


Recommended Posts

Howdy,

My drivers side window has some bad sratches in two places that seem to me to coincide with it scraping when going up and down. My passenger side window has started this too.

Could this be the guides worn or something? They are electric of course.

I want to get my car tinted, but I should get this fixed before I get it done.

Does anyone know how to fix this!?!?

Thanks for any help in advance...

Link to comment
https://www.sau.com.au/forums/topic/25185-failed-window-guides-bad-scratches/
Share on other sites

Mines the same.. its got 2 scratches on the drivers-side window... gives me the sh!ts!!!

Anyway you can stop it from happening??

its pretty common.. cos ive seen a few skylines with the same sh!tty scratches..

you can get them p;olished out, dunno how much it costs, but as for fixing it dont try it yourself, i tried and tightened the window runners too tight when i put it back, im sure they are now clean but whenh iu over tightened i scratched my tint a bit on the inside and now have to get the window re-tinted, so we'll see if that gets scratched when im done getting it replaced :P

Sounds like the scratches are on the outside, basically your options are...

If they are not deep Windscreen O'brien or someone similar maybe able to buff them out and fix it

Or just get new windows if they cant

Basically your seals would have a gap somewhere and when crap gets down there and rubs against the windows it causes this light scratching. I have the same but havnt bothered to fix it, however I did enquire how and my options I received are what I listed above

Good Luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...