Jump to content
SAU Community

Recommended Posts

engine internals

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

head rebuilt with tomei poncams

tomei exhaust cam wheel

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black

gt3582r-iw with exhaust housing HPC coated black

choice of either 18 psi or 24 psi actuator.

turbo beenie

ss braided lines both feed and return.

3 inch dump with 2 inch wastegate pipe all in 316 stainless

5 inch cat

PFC with inbuilt Boost controller

600 x 300 x 80 ASE front mount

brand new bosch q45 AFM

4 inch stainless intake

FPR with gauge

044 intank setup.

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

includes all new custum clutches and kevlar band etc

this is my wifes car so was only ever boosted properly on the dyno.

either seperate for parts or sell car whole.

open to offers

Hey mate

I know you probably wanna sell the car whole, but would be interested in the Transmission if you do seperate it. Pm me details on price, locatation etc.

Cheers

Brendan

Hey mate

I know you probably wanna sell the car whole, but would be interested in the Transmission if you do seperate it. Pm me details on price, locatation etc.

Cheers

Brendan

no worries i will happily seperate the car if i can find buyers for a few of the major parts like manifold / turbo set up, engine , trans etc.once the big things are allocated i will strip all the parts and list prices for all the remaining mods.

I'm interested in some of the items but I'm located in the USA...do you have a problem with international postage? I have a FedEx account if that makes things easier for you. Thanks!

-Blake :P

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

Short motor $3500

head rebuilt with tomei poncams $1500

tomei exhaust cam wheel (not installed) $200

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black $1000

gt3582r-iw with exhaust housing HPC coated black $1500

choice of either 18 psi or 24 psi actuator. $100 each

turbo beenie $75

ss braided lines both feed and return. $100

3 inch dump with 2 inch wastegate pipe all in 316 stainless $200

5 inch cat $150

PFC with inbuilt Boost controller $1000

600 x 300 x 80 ASE front mount $700

brand new bosch q45 AFM $300

4 inch stainless intake $100

FPR with gauge $150

044 intank setup. $200

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

large trans cooler

includes all new custum clutches and kevlar band etc $2200

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

Short motor $3500

head rebuilt with tomei poncams $1500

tomei exhaust cam wheel (not installed) $200

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black $1000

gt3582r-iw with exhaust housing HPC coated black $1500

choice of either 18 psi or 24 psi actuator. $100 each

turbo beenie $75

ss braided lines both feed and return. $100

3 inch dump with 2 inch wastegate pipe all in 316 stainless $200

5 inch cat $150

PFC with inbuilt Boost controller $1000

600 x 300 x 80 ASE front mount $700

brand new bosch q45 AFM $300

4 inch stainless intake $100

FPR with gauge $150

044 intank setup. $200

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

large trans cooler

includes all new custum clutches and kevlar band etc $2200

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...