Jump to content
SAU Community

Recommended Posts

What do you think I should expect to pay to get an Apexi S-AFC installed and dyno tuned (sydney prices)?

Is it easy/worth installing myself and then taking it to get tuned? If so, if I install it with the stock settings will it affect the car badly (will i still be able to drive to work in other words) until i get it tuned?

cheers.

Link to comment
https://www.sau.com.au/forums/topic/25231-safc-installation-costssuggestions/
Share on other sites

it easy az to install yourself download the manual from apexi.com .Make sure u set the hi/lo maps at 0% and it drive's like stock,no change to the ecu.Most dyno place's charge $100 an hour then $50 every hr after that.Wont take more than 30mins to dyno but $100 is min charge.

thanx BoOsT_JuNkY... I'm still not sure about installing it, I'm not hopeless when it comes to cars but most of my experience is in car stereo installation, not much to do with engines at all (unless they're rotary!). How long do you think it will take to install the s-afc (wiring, soldering, etc) and do you have to run wires to the computer or to somewhere else?

Can anyone recommend a place in sydney to get the s-afc installed? Preferably somewhere that has done an r33 with a s-afc before.

Cheers.

Hey mate, i might be selling an SAFC II soon as im upgrading management.

Im in sydney, if you want it ill install it for you at my place, or show you how if you like - its really easy.

at procar dyno in Cromer it will cost you $80 to have it tuned.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...