Jump to content
SAU Community

Recommended Posts

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Tentative plan at the moment is too meet up at the BP/McDonalds at Milton Rd, Milton, parking at back of maccas or in streets behind. Head out on Waterworks Rd/Mt Nebo Rd/Mt Glorious Rd. 1 stop @ 27km @ Jollys lookout carpark. Then a 63km run to Somerset Dam picnic area, probably a 2nd stop to be decided. maps to follow soon.

yer count us in, just let me know a time for the nilton maccas meet up, maybe phil and i can meet somewhere and drive to milton together. just dont expect me to go fast as my car wont go over 2500-3000rpm.

Some mud maps for the cruise. I guess the time will depend on when Micah and Gold Coasters are planning to leave. TBA. No plan for return trip, either back using similar route or a more relaxing drive to the Bruce Hwy via Kilcoy.

If we end up parking in the undercover carpark at the rear of Ronnie's in Milton, might be a good idea to at least buy a 40c cone, thus avoiding any loitering issues which may arise.

post-780-1233050324_thumb.jpg

post-780-1233050342_thumb.jpg

post-780-1233050358_thumb.jpg

post-780-1233050373_thumb.jpg

Ok, so the Gold Coast (1st) meeting point will be at Coomera BP at 9.00am, with a 9.30 departure time. According to whereis.com, it should take us around 40 mins to reach Black st in Milton (Chook's meeting point), so I assume we'll leave a short time for any latecomers to arrive, and anticipate leaving there at around 10.20am-10.30am, then it's on to Chook's route. I am going to perform a full recce run this weekend, to determine any potential issues with roadworks, etc.

I am waiting on a large number of contact ph#s etc, and need to know what you guys want to do for lunch: bring your own, or contribute cash/food toward a bbq (if we go this way, I will need to know how many passengers/extras are coming, so we can get enough food and drink).

Info has now been added to first page

If you have any queries, please pm myself or Chook.

Cheers,

Micah

Micah, I drove the route today up to the Mt Nebo/Mt Glorious intersection, road is good. However the Jolly's lookout carpark only holds around 15 cars, as 1/2 is parking for motorbikes, empty today but on a Sunday might be hard to park all our cars. There is a another carpark further down the road on the same side, WESTRIDGE OUTLOOK, parking for around 25 I reckon. If you do the reccy run, could you check out what the parking is like there on weekends ? Simon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
×
×
  • Create New...