Jump to content
SAU Community

Something is wrong =(

BoOsTeD_RB26

By BoOsTeD_RB26,
in Engines & Forced Induction

 Share

Recommended Posts

BoOsTeD_RB26 Experienced

BoOsTeD_RB26

Posted
Posted

Hey all,

Just of last night I have been having some problems with my car. First of all the idle has become really really rough. The car will literally "shake". Im not exactly sure what it is but it seems to be excessively rich as it struggles to stay alive.

I put new plugs in it today but they did absolutely nothing.

Could it be the AFMs?

When the car is like this, the boost gauge also "flickers" while it is in vaccum.

Any ideas?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/25283-something-is-wrong/
Share on other sites
Steve Grand Master

Steve

Posted
Posted

Sounds like it may be a vacuum leak.

The ecu is measuring the air that comes through the AFM, but too much air gets in, so the ecu compensates by adding more fuel as it tries to maintain idle, then it over fuels, cuts the fuel - viscious cycle.

If it is vacuum, you will notice it alot more when hot than when cold too.

My guess anyways:)

have you checked all your vacuum lines?

MRK25T Experienced

MRK25T

Posted
Posted

I may have similar problems with my car.

When I stop up a hill (this occurs when driving normaly beforehand) the revs drop really low (sometimes at this point the car stalls) and then pick themselves. This loops for about 5 seconds (at a frequenct of about 1 cycle per .5sec) and then the revs stabalize.

Background:

I have a s2 R33 gtst.

I have a blitz BOV.

My AFM maxes out at less than 250rwhp on the dyno.

Sometimes when going up a hill at about 4000rpm by engine check light flashes (indicating my AFM is maxing out - its not the quick flashing that indicates pinging).

I'm running low boost (0.6bar) when this happens.

There is a Z32AFM sitting under my bed waiting to be installed to fix my AFM problems.

Anyone know what my problem is?

Mark

Steve Grand Master

Steve

Posted
Posted

Well I am not sure if this is the prob, but does the pump have a non return vavle fitted? I have seen the non return valve taken off the top of 044 pumps to make them easier to connect.

I am sort of guessing :P, but when at idle the fuel pump will switch on and off as fuel pressure increases and decreases, just like when you turn the ignition on and dont start the car, the pump will prime then shut down. I am thinking that perhaps the pump is shutting down, and fuel may be returning back down the lines, which isnt a major problem until you are facing up a hill.

Have a look at boostmeisters low engine rpm stalling thread, goes into detail of wiring fuel pumps to be constantly on to avoid such dramas. Not sure if this is your prob, but may be:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      The Evolution Of "night Fury"

      By Murray_Calavera · Posted

      Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • niZmO_Man
      Dumb rich kid tries modding for the first time

      By niZmO_Man · Posted

      New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Just planning to have the wiring neat and hide as much as possible.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...