Jump to content
SAU Community

Recommended Posts

will be in the market soon for one of these cars. The only problem is i cant find many evos out there for sale. I've tried carpoint, drive,etc .... can u guys recomment other websites?

Anyways, I've looked into both cars, just wanted u guys opinions on both...

kind leaning towards the evo cos its so rare in Australia, plus constant awd, 4 door ,etc ...I can make those wrx's drivers jealous :P ( we all know wrx drivers want evos deep down) ;)

wat u guys think ?

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

If i had a family and i still wanted a fast-4 pocket-rocket definately the Evo-6(the only last true Evo IMHO) gets my vote.....4doors too;)

but right now i'm leaning towards the R33 GT-R....not sure about making WRX drivers jealous or not...but i'm sure it'll be able to keep up with the best of them:D

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/#findComment-537893
Share on other sites

Personaly I would go for the EVO 6, I love the Skylines especially the GTR's but I have a family and trying to get a good family sports car (4 Door) is a bit harder to chose.

EVO 6 or R34 GT-T Sedan is what I would be looking at.

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/#findComment-537915
Share on other sites

The reason you don't see many evo's around is they don't represent very good value.

The Evo has wind up, wind down windows for example.

It's also a pretty uncomfortable ride.. the only thing you pay for, the only thing you get.. is the 0-100 and 0-400 times and the driving experience. The GTR gives you that as well as stuff like .. *gasp* air conditioning, power windows and those kind of features.

Also I don't really feel justified paying 60k+ for a 4 cylinder turbo car.

I'd take the R33 GTR.. get a later model vspec.

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/#findComment-537920
Share on other sites

As Rezz said, various evos comes in various configurations (RS (?), GSR, tommi makinen, GTA, etc) - If you find one, it'll probably be the 'base' model which has all the normal goodies.

The interior is a bit bland - but then again, the 33 interior isn't exactly inspiring either.

There is an evo vi for sale on performance forums right now (check it out when the site is back up)

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/#findComment-537974
Share on other sites

i absolutely love everything about the evos... looks (pre-evo7 models that is.... i don't know what they are thinking these days...) , performance, etcetc...

one thing that stopped me buying an evo over gtr was, at the end of the day they are just very fast lancers...

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/#findComment-537982
Share on other sites

the evo like the gtr sit very well on the road, ride wise they are stiffer than ny other car but thats wat u get when u want a "sports" car, i'd get the TME evo 6, GSR, titanuim twin scroll turbo mmmmmmmmm

i dig the interiors, they equiped with recaros and are very functional!

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/#findComment-538139
Share on other sites

Originally posted by Guilty

If u have a family, i would advise you to get a 350Z or an STI which would farken go hard as well =)  

but yeah jus my 2c.....

Given that the 350Z is a 2 seater only, I don't think thats very good advice mate.

Probably should learn a bit more about a car before you recommend it :D

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/#findComment-538159
Share on other sites

dumbkents..u didnt have to flame me for dat...asholez..

well a family can consist of 2 cant it? faggotz who said a family car has to be 5 people......wat if a family has 2 parents n 5 kids? yai an evo can reali fit all dat...den mayb a tarago? so the word "family" is open to different interpretation so dun farken flame me for givin my opinion......

+ a high performance car isnt really classified as a family car...but anyhowz da bloke didnt even mention about a family......but ye go get a 350Z..its much more newer n worth buyin den an EVo...

Link to comment
https://www.sau.com.au/forums/topic/25316-evo6-or-r33gtr/#findComment-538521
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers)
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
×
×
  • Create New...