Jump to content
SAU Community

Recommended Posts

Nissan 180sx

Location: Ballarat

Condition: Excellent condition

Reason for selling: Time to calm down...... a little

Payment details $16,500 or consider swap or trade plust cash adjustment if required

Details:

The engine was professionally built over 6 months by a very reputable ca18 engine builder and is capable of pushing out 250rwkw and around 700nm or torque, in it's current state it's running a measly 167.5rwkw as the car is only used as a daily driver to and from work. This can obviously be changed in cab.

I'm getting a little older and have come to the conclusion that I don't need a race car to get me too and from work, also the car needs to be driven the way it was designed and built.

Being a ca18 this car can be driven very economically which is a bonus in this day and age. Not sure if it's because I'm a little older too but I've had absolutely no police attention in this car what so ever.

I could be interested in swap or trade plus cash adjustment if required.

Feel free to contact me for any extra info etc

Josh

0413 487 971

Forged Pistons

Forged Rods

Performance rings

Balanced and blue printed block

Ported head

Billet aluminium balanced crank

Upgraded roller bearing turbo

Z32 AFM

R33 radiator

Big cooler (Only a month or so old)

Carbon Kevlar timing belt

Thermo fans

Tensioned valve springs

550cc injectors

HKS Cams

HKS Cam gears

HKS incab duel stage boost control

HKS Turbo timer

HKS Silicon hoses

HKS Duel dump pipe

HKS Boost gauge

HKS 3 layer head gasket

HKS POD filter

HKS Stainless shifter

Mines ECU

OS Giken custom clutch

Lightened fly wheel

Momo steering wheel

Blitz NUR-Spec 3" stainless exhaust

Stainless tuned length induction

High flowed throttle body

Strut brace

Engine resprayed candy apple red

Car resprayed Polar White

Recaro adjustable back race seat

HUD (speedo on windscreen)

C-West front bar

Buddy club side skirts (I think)

Vertex rear bar (I think)

Shaved rear wing

Type x tail light and centre

P1 Buddy light weight race rims

2 way mechanical LSD (Cusco I think)

Fully adjustable JIC Gold coilovers

Upgraded cross drilled disks

Upgraded callipers

Project Nu race pads

GFB BOV

Powder coated black cooler pipes

Black wired alarm

Keyless entry

Electric windows

Full stereo including sub and amp

Origional 180sx floor mats

There's obviously a lot more that I've forgotten but im at work and can't remember it all.

Pictures:

Contact Details: Josh 0413 487 971

post-58941-1232359082_thumb.jpg

post-58941-1232359110_thumb.jpg

post-58941-1232359133_thumb.jpg

post-58941-1232359154_thumb.jpg

post-58941-1232359164_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/253289-nissan-180sx-the-balls-edition/
Share on other sites

  • 2 weeks later...
upgraded roller bearing turbo?

capable of 250rwkw?

Yeah mate as in it's bigger than what was origionally on there and im not sure of the specs, i could be a twat and make up a bunch of numbers but at the end of the day, why tell storys?

And the 'capable' is in reference to the engine being able to get that high on a rude tune, it'd require different fuel and would be detrimental to the engine to run it that hard for a long while. The engine will however happily drive safe at 210-220rw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...