Jump to content
SAU Community

Recommended Posts

yeah. Interestingly it is 80mm before the mid "muffler" -- and then opens up to 90mm to the rear muffler..

I suppose because of the difficulty obtaining 90mm dumps and 90mm cats!

also weighs 6kg vs stock 18kg

Yeah right interesting... You could be right...

I might just have a few questions for Tim and ask him LOL!

6kg thats like a 3rd of the weight of the stock one, still Veilside is 4kg = even lighter haha!!

http://www.youtube.com/watch?v=-Tbo5x_7We4

http://www.youtube.com/watch?v=JQS7b8oxGLA

BLITZ Nur RR Muffler

pipe size:Main 100mm

Tip O.D.:115mm

these are the specs he has listed the exhaust under and i emailed him but he seems to think they do not make them in the 100mm which is fine by me i dont mind 3 inch as its still going to flow very well but i just want to know if they sit identical to his gtr with the 100mm piping etc.

here are the links to the ideantical one i want....

  • 4 weeks later...

if i have an r34 gtr i would only get a Kakimoto N1 Full Mega Dual

Has a unique roar to it and sounds insane...u can get them full turbo back so no cat (for race use)

Unfortunalty they are discontinued now but u can find second hand ones around

In the pic below of CYIFLY.....he was giving it next to my car and my whole car was vibrating from his zorst

post-19216-1235223618_thumb.jpg

post-19216-1235223689_thumb.jpg

  • 2 weeks later...

LoL That is the kakimoto full dual mega N1, They do a 3.5" single full mega N1. I have one on my gtst. Sounds awsome.

Looks like this

post-37176-1236172436_thumb.jpg

Here is one for sale in the classifieds

http://www.skylinesaustralia.com/forums/Ka...amp;hl=kakimoto

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...