Jump to content
SAU Community

No Power From Turbo

errno

By errno,
in Engines & Forced Induction

 Share

Recommended Posts

errno Enthusiast

errno

Posted
Posted

Hey guys,

Just bought a r33 not long ago, the past week Id noticed acceleration was a little jittery - not as smooth as it first was, and yesterday it seemed like all power that normally comes when the turbo boosts is missing.

The best way to describe the sound its making is as if the airbox is sucking alot of air (its quite loud, not as loud as it normally was). The boost guage built into the dash under the RPM tacho still moves when accelerating etc.

Any ideas what this could be? Everything is stock as far as im aware, stock turbo, stock boost the only thing that is changed is a k&n panel filter in the stock airbox.

Link to comment
https://www.sau.com.au/forums/topic/254094-no-power-from-turbo/
Share on other sites
DARK_JET Newbie

DARK_JET

Posted
Posted

i had some issues with my r33 gts-t when i brought it....it was lagging power when on boost

took it to a trusty mechanic and he told me my catalyic converter was glogged up with shit....so he knocked it out

after that man good as gold...had a tune and some more boost.... and the result was 190.1kw @ 9psi and the wheels :) stock as a rock besides spitfire coilpacks

Bennett Mentor

Bennett

Posted
Posted
is the turbo hard to get to to check for broken fins ?

Depends how experienced you are with playing round in the engine bay. Take the cooler pipes and intake pipes off to check the intake side of the turbo and take the dump pipe off to check out the exhaust side of it. Chances are if your not sure how to get to it then it will take a while.

The best way to describe the sound its making is as if the airbox is sucking alot of air (its quite loud, not as loud as it normally was).

So air intake is louder or more quiet than normal?

errno Enthusiast

errno

Posted
  • Author
Posted (edited)
So air intake is louder or more quiet than normal?

Air intake is alot louder than before

edit: just re-read my OP, yeh that didnt make sense, i was meant to write it was alot louder not that it was not as loud, heh

Edited by errno

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Help! Leak coming under transmission

      By Chupapy · Posted

      Thanks for the reply mate. Well I really hope its a hose then not engine out job
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      But.... the reason I want to run a 60 weight is so at 125C it has the same viscosity as a 40 weight at 100C. That's the whole reason. If the viscosity changes that much to drop oil pressure from 73psi to 36psi then that's another reason I should be running an oil that mimics the 40 weight at 100C. I have datalogs from the dyno with the oil pressure hitting 73psi at full throttle/high RPM. At the dyno the oil temp was around 100-105C. The pump has a 70psi internal relief spring. It will never go/can't go above 70psi. The GM recommendation of 6psi per 1000rpm is well under that... The oil sensor for logging in LS's is at the valley plate at the back of  the block/rear of where the heads are near the firewall. It's also where the knock sensors are which are notable for 'false knock'. I'm hoping I just didn't have enough oil up top causing some chatter instead of rods being sad (big hopium/copium I know) LS's definitely heat up the oil more than RB's do, the stock vettes for example will hit 300F(150C) in a lap or two and happily track for years and years. This is the same oil cooler that I had when I was in RB land, being the Setrab 25 row oil cooler HEL thing. I did think about putting a fan in there to pull air out more, though I don't know if that will actually help in huge load situations with lots of speed. I think when I had the auto cooler. The leak is where the block runs to the oil cooler lines, the OEM/Dash oil pressure sender is connected at that junction and is what broke. I'm actually quite curious to see how much oil in total capacity is actually left in the engine. As it currently stands I'm waiting on that bush to adapt the sender to it. The sump is still full (?) of oil and the lines and accusump have been drained, but the filter and block are off. I suspect there's maybe less than 1/2 the total capacity there should be in there. I have noticed in the past that topping up oil has improved oil pressure, as reported by the dash sensor. This is all extremely sketchy hence wanting to get it sorted out lol.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I neglected to respond to this previously. Get it up to 100 psi, and then you'll be OK.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I agree with everything else, except (and I'm rethinking this as it wasn't setup how my brain first though) if the sensor is at the end of a hose which is how it has been recommended to isolate it from vibrations, then if that line had a small hole in, I could foresee potentially (not a fluid dynamic specialist) the ability for it to see a lower pressure at the sensor. But thinking through, said sensor was in the actual block, HOWEVER it was also the sensor itself that broke, so oil pressure may not have been fully reaching the sensor still. So I'm still in my same theory.   However, I 100% would be saying COOL THE OIL DOWN if it's at 125c. That would be an epic concern of mine.   Im now thinking as you did Brad that the knock detection is likely due to the bearings giving a bit more noise as pressure dropped away. Kinkstah, drop your oil, and get a sample of it (as you're draining it) and send it off for analysis.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
×
×
  • Create New...