Jump to content
SAU Community

Recommended Posts

Hey guys, our track miraculously won't start now once I hit the button

Its a forged RB25

Microtech LT12S

GT35R

etc etc etc

Now when I turn the key it cranks and cranks forever but will not fire

There is no spark from the Splitfire coils, and the injectors do not tick

When the ignition is switched on, with CAS removed from engine, and I spin the end of the CAS - both the injectors and coilpacks tick, however when I put the CAS back in the engine - theres nothing

I am bamboozled - have replaced CAS, and Ignitor to no avail.

I am wondering if maybe tehre is a voltage drop somewhere in the electrics of the car???

Any idea or things to check would be great!

Check the wiring for breaks going into the CAS. Maybe by removing the unit you are bridging a broken gap in the wire.

Long shot but it's the first thing I would check.

Also make sure the drive on the camshaft is still there.

Pretty much there are lights on the side of the ecu, pretty sure the red one flashes when there is a problem. If it flashes, check your hand controllers error log screens (screen 33 off of memory) and it will show what error options there are.

ErrorChk1 is for air temp, crank angle, home and ref

ErorrChk2 is for MAP, RPM, TPS and DC volts

See what it says from them and start from there.

check your fuses

Mine was a stupid blown fuse (yes I did check them first)

same thing i could take the cas out turn it and there was ticking only problem was i couldnt get a spark (occasional weak spark)

but when we looked at fuses again there was a blown one

changed that and away she went

I have a handset controller but the screen died months ago - it occassionally shows some info - i have used another controller on the ECU and it works fine so I guess my controller is only good as a paperweight now

check your fuses

Mine was a stupid blown fuse (yes I did check them first)

same thing i could take the cas out turn it and there was ticking only problem was i couldnt get a spark (occasional weak spark)

but when we looked at fuses again there was a blown one

changed that and away she went

I checked all the fuses like 10 times - theres only 5 in the cabin for the whole car :D

Highly unlikely, but I had an issue with mine recently where the green wire for the fuel pump relay wasn't working, I ended up wiring the relay straight to earth, till I can either get it fixed or find a better solution.

Auto Sparky who re-wired teh whole car is coming out tonight to look at it - jus seems weird that teh CAS when spun by hand makes the coilpacks emit spark and injectors tick - which would make me think the ignitor is fine - however once u try and crank the car, the CAS does nothing. I have watched cranked engine with no CAS fitted and the end of the cam definitely spins :D

Edited by The WOR57
As the WOR57 stated is the drive inside the cam engaging into the cas locater?

Check for bad electrical contacts if you sad that when you remove the cas it triggers the inj's then it sound like bad conecction

the keyway in the end of the cam spins, which in turn I would assume spins the end of the CAS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...