Jump to content
SAU Community

More Shit For Your R34 Gtr - Bride Stradia Sport Seats, Cusco D1 Cage, Front Diffuser, Hks Fuel Rail, Sard Fpr, 5zigen Exhaust, Nismo Clutch,


Recommended Posts

Still have tons of parts to sell for BNR34 GT-R. Pickup near Hornsby, or freight can be arranged as well if required at your cost.

- Genuine Bride Stradia Sport seats, BRAND NEW, pair, including Bride seats rails to fit R34 GTR --- $3500

- Cusco D1 5 point half cage, BRAND NEW, full chrome moly --- $1200

- HKS fuel rail, used --- $280

- Sard Type RJ fuel pressure regulator, used --- $250

- 5Zigen Fireball cat-back exhaust, full 3" stainless, no mid muffler, loud without silencer but quiet with it on, used ---$600

- Genuine Nissan front plastic diffuser, I have both new and used one --- $1150 new, $700 used

- Nismo G-Max twin plate clutch kit, used but only travelled about 10,000kms - $1000

- GReddy eManage harness kit, NEW --- $180

- VOLK GT-C in 19 x 10.5 +11, PAIR ONLY, Brand New, Face 2 with curved spokes, Silver colour --- $2500

- AVS Model 5 wheels with tyres, 18 x 10 +18 all round, silver spokes, no gutter marks, set of 4, used - $2000

- Volk GT30 in 19 x 10.5 +17 - Formula Silver, rims only, set of 4, NEW - $4200

- Kumho KU31 275/30R19 x 4 tyres for above rims, NEW - $1100

- Trust/Greddy Spec R HG, Type23 Intercooler, 115mm thickness, Brand NEW - $2400

- Trust/Greddy hard pipe kit for cooler, NEW - $750

- Trust/Greddy aluminium radiator pipe, NEW - $150

- Nismo front bar in Bayside Blue, USED but in excellent condition - $1800

- HKS SSQV kit including aluminium pipe, NEW - $650

- Sard fuel rail, NEW - $350

- Standard Nissan GTR cluster, used, unknown kms --- $300

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Picture of front diffuser please.

Are you after the new or used one?

Some pics of the front bar. Rest I'll post up tonight.

post-2802-1233210696_thumb.jpg

post-2802-1233210711_thumb.jpg

post-2802-1233210728_thumb.jpg

post-2802-1233210741_thumb.jpg

post-2802-1233210753_thumb.jpg

hi eugene,

- GReddy eManage harness kit, NEW --- $180

is this the main harness, is it universal or model specific & to suit emb or emu?

cheers

Update on sold parts.

- Genuine Bride Stradia Sport seats, BRAND NEW, pair, including Bride seats rails to fit R34 GTR --- $3500

- Cusco D1 5 point half cage, BRAND NEW, full chrome moly --- $1200

- HKS fuel rail, used --- $280

- Sard Type RJ fuel pressure regulator, used --- $250

- 5Zigen Fireball cat-back exhaust, full 3" stainless, no mid muffler, loud without silencer but quiet with it on, used ---$600

- Genuine Nissan front plastic diffuser, I have both new and used one --- $1150 new, $700 used

- Nismo G-Max twin plate clutch kit, used but only travelled about 10,000kms - $1000

- GReddy eManage harness kit, NEW --- $180

- VOLK GT-C in 19 x 10.5 +11, PAIR ONLY, Brand New, Face 2 with curved spokes, Silver colour --- $2500

- AVS Model 5 wheels with tyres, 18 x 10 +18 all round, silver spokes, no gutter marks, set of 4, used - $2000

- Volk GT30 in 19 x 10.5 +17 - Formula Silver, rims only, set of 4, NEW - $4200

- Kumho KU31 275/30R19 x 4 tyres for above rims, NEW - $1100

- Trust/Greddy Spec R HG, Type23 Intercooler, 115mm thickness, Brand NEW - $2400

- Trust/Greddy hard pipe kit for cooler, NEW - $750

- Trust/Greddy aluminium radiator pipe, NEW - $150

- Nismo front bar in Bayside Blue, USED but in excellent condition - $1800

- HKS SSQV kit including aluminium pipe, NEW - $650

- Sard fuel rail, NEW - $350

- Standard Nissan GTR cluster, used, unknown kms --- $300

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...