Jump to content
SAU Community

Recommended Posts

I have for sale some Bridgestone RE55 Semi Slicks, these tyres are brand new, never fitted or used. I have two sizes available 225/50/16 and also 265/35/18. Can call me direct on 0430 494 018 or simply PM for further details or to come have a look etc. Thanks

Sorry...16" - $200each firm & 18" - $350 each firm. Thanks again.

Edited by mixd
Link to comment
https://www.sau.com.au/forums/topic/254603-tyres-bridgestone-re55-semi-slicks/
Share on other sites

It might be best to PM me or message my above phone number for direct questions like "will they fit such and such". But to answer generally...I am in Melbourne,(Alphington/Kew area). 265/35/18 will fit on 9.5" rims perfectly I really don't recommend running 265/35's on 8.5" rims...not in semi slicks. Yes will sell pairs, I have a few sets of each so will sell in matched pairs, left and rights. Cheers

I am calling and calling.

These are street legal yes?

I have 4 x 265/35/18 RE01R's at the moment and the front 2 are up for replacing, will it be okay to replace with the 55's?

If so, how much for 2 posted to WA?

If not, can you let me know full set of 4 to WA

I am calling and calling.

These are street legal yes?

I have 4 x 265/35/18 RE01R's at the moment and the front 2 are up for replacing, will it be okay to replace with the 55's?

If so, how much for 2 posted to WA?

If not, can you let me know full set of 4 to WA

Yes treadwear indicators and load/speed rating = street legal...very sticky and soft...but street legal.

ive been trying to call on several occasions today, and just recently about 2 mins ago. yet no one seems to answer that number provided. If you are seriously keen to sell, at least answer the damn phone.

also called about 5 times today. keen on 4 X 16" shipped to Sydney.

As per above post...perhaps PM me is best...no stress guys, I have more than one set of each available. Simply leave a PM and I will reply when I(more than once a day) check back into to this forum. Cheers

actually can that, I just scored 4 x RE01R's (last 4 in the country apparently) for $1500 fitted, I am over the friggin moon

Hilarious. I also got the 'last 4', also for $1,600.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...