Jump to content
SAU Community

Recommended Posts

not sure if anyone has seen these parts before... but i visited their shop today and was surprised they make these so cheap:

http://www.vivagarage.com.au/nissan/stagea..._aeroparts.html

Make sure you check the Nissan - Stagea links up the top, because there are more parts available. I had a good look at their R34 stagea today. Looks the goods!

Nigel. SA

Link to comment
https://www.sau.com.au/forums/topic/254842-stagea-body-kits-cheap/
Share on other sites

not sure if anyone has seen these parts before... but i visited their shop today and was surprised they make these so cheap:

http://www.vivagarage.com.au/nissan/stagea..._aeroparts.html

Make sure you check the Nissan - Stagea links up the top, because there are more parts available. I had a good look at their R34 stagea today. Looks the goods!

Nigel. SA

2048150955_97c605f1cc.jpg

nice find....the 34 front looks good...wonder how much labour is to fit it.

More to the point, how much do the rest of the parts cost.. they only list the front bar and fenders... not the bonnet, the hinges, the bonnet latch the headlights the headlight brackets and the radiator support

Got abit excited when it seen the R34 conversion kit and then remembered R34 non xenon headlights are around $1000 a pair then around $2000 for xenon head lights.. bonnets are only $100 for a second hand one so the conversion would be relatively cheap apart from the damn headlights :)

Edited by SHIZNT

Picked up my type M front bumper on Thursday. Currently getting it fitted to my Stagea as we speak, holes are not pre-drilled. Friendly service at Viva Garage and they love to talk about the stags. Once its fitted correctly, I pull it off again for a light rub and spray. :ermm: Just in time for the car show next weekend.

Will post pics when done ... and if it ain't too hot. :banana:

Here's a very rough chop..

Trying to decide do I save my money and slowy buy parts to do a R34 front end conversion and just continue taping the cracks in my bumper.. get another Nismo look alike from Monkey Warehouse or get a Vivgarage Type M bar..

IMG_0027-1.jpg

stagea2.jpg

Do the Viva, I like the look of those kits (Masa) I am planning on getting one for my s2 stag. Plus there looks to be quite a bit of meat on the bottom part of the front bumper so i imagine it would hold up reasonably well. Looking at your nismo front bumper it doesn't look like it would take much to damage that.

Got abit excited when it seen the R34 conversion kit and then remembered R34 non xenon headlights are around $1000 a pair then around $2000 for xenon head lights.. bonnets are only $100 for a second hand one so the conversion would be relatively cheap apart from the damn headlights :P

Where do you find s/hand genuine alloy r34 gtr bonnets for $100. :P

R34 GTT bonnets will not suit.

Pretty sure r34 zenons are about $1600 EACH new.

I would also question the fitment quality of copied Masa R34 guards from Viva. If they have not re-shaped them and just taken a mould from the original Masa guards they would fit even worst.

I have a genuine set of Masa guards and they do not fit perfectly and will be scrapping them soon for some re-worked CCubed copies.

hey Jay .... wasnt that the bumper the caryard had on previous ?

Kinda looks the same but the bar the caryard had on it was a Abflug bar.. there rare as hensteeth to find and are over $1000 for a new one from Abflug in Japan then you have nearly $800 for postage ontop of that..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...