Jump to content
SAU Community

Recommended Posts

I sell split systems at my work.

Pete I can see what I can do if you want?

Personally Id suggest the Mitusbishi units or even the kelvinator (electrolux).. Got a 1.5 HP Kelvinator Inverter for around $800. Got a mitsi 2hp, can see what I can get that for if ur interested?

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I sell split systems at my work.

Pete I can see what I can do if you want?

Personally Id suggest the Mitusbishi units or even the kelvinator (electrolux).. Got a 1.5 HP Kelvinator Inverter for around $800. Got a mitsi 2hp, can see what I can get that for if ur interested?

yes please flicky...just get a few prices for a 25 squ metre area (std height ceilings) if that's OK....not sure if 1.5 hp would be enough or whether I need a tad bigger?

cheers

No probs pete! Id say 1.5HP would be fine for that size but i can check on our programme we have at work, we can enter in measurements and room sizes etc to get a better idea.

Will let you know tommorow

mitsubishi are really good too

reliable, freezing cold, usually a bit cheaper than the fujitsu etc. theyre well made units. forget the chinese ones. they dont even conform to their own specs.

a 2hp for a single room would do the trick

i have a 3.5 hp in the loungeroom and it reaches most of the house.

x2 for the Mutsubishi units.one of the best on the market. Ive owned 3x 3.5hp units and wouldn't buy anything else. Pay for a holiday to SA and ill install it for you.

Yep, evap can eat my buttocks.

I don't care how cheap the thing is to run if there's no difference with it on or off!

Ducted Daikin inverter here - cost a few beans to do, but when it comes to my comfort in summer and the comfort of pregnant women and babies / small children I couldn't put a price on it.

i got too admit we have ducted evap that works really well MOST of the time and does a great job BUT there are a few days of the yr where the evap just dosent make the grade .

hence why i want to put a split system in the family room . the family room and the kitchen are really one big room separted by a island type bench . but as we spend most of the time in the family room i think we would benifit from the split . actually it really dosent even need to heat as we have a wood fire and a gas heater there . but refrige cooling would be great .

enough of my ramblings .

cheers dean

evaps are fine if you buy the right brand and more importantly the correct "hp" motor....always best to get bigger then you need so the unit isn't struggling to work properly.

Just like buying a turbo! :)

Currently have a cheapo 1hp Chinese branded split type A/C (branded "Chillair") in my room, that my parents bought in some Chinese A/C shop. Unit is just over $300 (MUCH cheaper than any other 1hp models that we saw in the main stream shops) & I forgot how much the install was; my parents called up tons of places & found a Vintam guy to install it for the cheapest price.

The A/C is about as generic as you can get, standard compressor, not a inverter model & pretty much just set the temp buttons & on/off switch. No other features, but it works wonders. can cool my room to under 18C when its about >40C outside.

Also the main living room is fitted with a massive old box type National branded A/C, it may be old & may make a sh*t load of noise when on, but it totally kicks the crap out of all the evap units family friends have in the cooling department.

Edited by Mayuri Krab
Also the main living room is fitted with a massive old box type National branded A/C, it may be old & may make a sh*t load of noise when on, but it totally kicks the crap out of all the evap units family friends have in the cooling department.

YES!!! We have a national 2.0 or 2.5hp wall unit, circa 20 years old, and STILL blows 16 degrees set on cold. Hasn't missed a beat! Gets helped out by the new daikin 2.5hp inverter on real hot days tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...