Jump to content
SAU Community

Recommended Posts

R34 GTR the same?

The ratios are different but they will all do those kinds of speeds if the power, strength of drivetrain and wind resistance is all living in 'the perfect world'.

Obviously there are restrictions and this is based on the estimate of ~3000rpm in 5th at 100km/h and every 250rpm higher is ~10km/h faster.

The easiest way to tell is to do 100km/h, note the revs, then go up 250 or 500rpm and use this to calculate your top speed at redline.

Keeping in mind that it will require approx 450hp at the wheels to go around 200mph and another 100hp at the wheels to go another 20mph. This is approximate also as relayed to me by a mate of mine who races on salt lakes.

Link to comment
https://www.sau.com.au/forums/topic/255085-gtr-topspeed/#findComment-4401169
Share on other sites

just trying to figure out (i have no idea if im right) but say you made 7000rpm the limit, would not all the cars of that model have the exact same top speed because of the final drive/diff ratio?

if in theory you could reach it power wise????????

Link to comment
https://www.sau.com.au/forums/topic/255085-gtr-topspeed/#findComment-4401163
Share on other sites

just trying to figure out (i have no idea if im right) but say you made 7000rpm the limit, would not all the cars of that model have the exact same top speed because of the final drive/diff ratio?

if in theory you could reach it power wise????????

They do not all have the same gear ratios.

There are different things that will effect the top speed: Gearset ratios, diff ratios, tyre size, top rpm, and finally the car's wind resistance.

But yeah, if you have 2 R32GTR's exactly the same, they would do the same speed at 7k

Link to comment
https://www.sau.com.au/forums/topic/255085-gtr-topspeed/#findComment-4401176
Share on other sites

The ratios are different but they will all do those kinds of speeds if the power, strength of drivetrain and wind resistance is all living in 'the perfect world'.

Obviously there are restrictions and this is based on the estimate of ~3000rpm in 5th at 100km/h and every 250rpm higher is ~10km/h faster.

The easiest way to tell is to do 100km/h, note the revs, then go up 250 or 500rpm and use this to calculate your top speed at redline.

Keeping in mind that it will require approx 450hp at the wheels to go around 200mph and another 100hp at the wheels to go another 20mph. This is approximate also as relayed to me by a mate of mine who races on salt lakes.

hey thanks for that :D

robbie

Link to comment
https://www.sau.com.au/forums/topic/255085-gtr-topspeed/#findComment-4401175
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...