Jump to content
SAU Community

Antilag Street Series - Sponsored By Tech 9 Tyres And Nexen


Recommended Posts

Antilag Street Series

Sponsored by Tech 9 Tyres and Nexen

Introducing the Antilag Street Series. A time-attack series based around providing affordable motorsport to people with street orientated cars.

The Street Series will be held at Wanneroo, run in a time-attack format. For those of you who haven’t done a time-attack event before, 6 cars will be out on the track at once and you race against the clock, not each other.

There will be tight regulations imposed mainly to ensure a fair and even playing field regardless of your budget.

You will compete against people in the same class. Classes are as follows:

• Mitsubishi Evo Class

• Subaru WRX Class

• Nissan GTR Class

• AWD other

• RWD over 2400cc

• RWD under 2400cc

• FWD

• B-reg Class

There will be an outright leaderboard as well.

A control tyre will be used. This is a Nexen N6000, and will be the only tyre allowed in the competition. We have organised with Tech 9 Tyres to subsidise the cost of the tyres, and as such you will get them at a cheap price.

Cars will be restricted to a maximum tyre width of 235’s.

To be eligible you must compete in 6 or more nights throughout the year. Your best time from each night will be counted as points to one decimal place, with your 6 best nights counted towards your overall score. The driver with lowest points is the leader of the class.

Being a ‘street’ series, the car must be street registered (but we have included a "b-registered" class).

Entry to the Street Series will include:

• 4 Nexen N6000 tyres (valued at $760).

• 1 Thursday night entry to the No Limits driver training event (Valued at $150).

• Membership to the No Limits Car Club (Valued at $15).

Entry will be:

$150 for your first event

$560 for 18" tyres (slightly cheaper if 17")

$15 for No Limits Club membership

Which is $725 if you pay all at once.

To get access to these "cheap" tyres, you will have to register and provide your drivers licence, name, rego, etc.

An average person walking off the street would pay $760 for a set of 235/40/18 Nexen N6000 tyres (this is an example only), so we hope you appreciate the effort we have gone to (and our sponsors) to cut the costs as much as we can.

Safety requirements are a road-worthy vehicle, CAMS L2S licence (available here: http://www.cams.com.au/downloads/pap...icRenewal.pdf), and a 1kg fire extinguisher.

If you have any queries feel free to contact either myself (0417 992 963) or Paul (0402 418 697) or simply reply to this thread and we will try to field any questions you may have.

Cheers

Additional Info (thanks for asking!):

The first event will be held on the 26th of MARCH at the No Limits night (where we will record your times), and 1 event every subsequent month (coinciding with the No Limits events).

Cams licence costs $95pa and requires you to fill in 1 form (linked above). You will need the L2S (speed) licence.

An e-mail address will be supplied soon (its being set up tomorrow) for you to send in your entries.

Control tyres will be available in 15", 16", 17", and 18".

If you're racing on 19", let me know and we will try and sort you out a good price on these tyres, but obviously they will be a little more.

Entry fee is 1 off (it's only that much because it gets you your free set of tyres, if you already have these tyres and don't want a new cheap set, we will sort something out), from then on it's $150 per event.

The RWD classes are not split between FI and N/A.

The only reason the entry fee is that high is because you get a set of tyres with it. If you wish to enter 2 drivers for the 1 car, it will be $725 + $150 for the first event (as you get your tyres) then $150 + $150 for every subsequent event.

If you already have these tyres, then just register and come to a No Limits night like you usually would, registration to this series is FREE.

If you want to get the tyres from somewhere else, then so-be-it, however you will get them substantially cheaper from Scott at Tech9 after you register with us and pay for your first event.

Your first "free" event can be transfered to whenever you wish, if you can't make it on the 26th of March.

Obviously there will be things we have to address, but don't be so harsh we will try to accomodate everyone

Edited by Chris260

sounds like a great idea :banana:

would enter but don't have the cash for another set of tyres.

would be great if they could have an open street tyre class and a race (semi-slick) tyre class; but can understand why you pick a control tyre

Edited by [Michael]
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...