Jump to content
SAU Community

Recommended Posts

Hey guys,

Here's the issue; On low load and cruise the turbos shuffle quite audibly on my car.

Here's the specs;

-RB30 bottom end (full forged)

-RB26 head, mild porting

-Tomei 270IN and EX cams 10.25mm lift

-Adj cam gears set to zero

-Hard pipe kit

-Stock BOV's

-Stock manifolds port matched

-Tomei dumps

-HKS front pipes

-HKS GT-RS's

-ARC airbox (the twin entry one)

-AFM's intact but not connected (ECU doesnt need them)

-OEM plenum

-OEM throttle bodies

So, a balance pipe has been suggested, but before spending another $1000 on the car, id like to hear first hand experiences from people who have fixed this issue :D

Link to comment
https://www.sau.com.au/forums/topic/255494-hks-gt-rss-shuffle/
Share on other sites

Hey guys,

Here's the issue; On low load and cruise the turbos shuffle quite audibly on my car.

Here's the specs;

-RB30 bottom end (full forged)

-RB26 head, mild porting

-Tomei 270IN and EX cams 10.25mm lift

-Adj cam gears set to zero

-Hard pipe kit

-Stock BOV's

-Stock manifolds port matched

-Tomei dumps

-HKS front pipes

-HKS GT-RS's

-ARC airbox (the twin entry one)

-AFM's intact but not connected (ECU doesnt need them)

-OEM plenum

-OEM throttle bodies

So, a balance pipe has been suggested, but before spending another $1000 on the car, id like to hear first hand experiences from people who have fixed this issue :D

Join the inlets and exhaust mainfolds together....fixed.

or...drive the car with WOT...fixed

Edited by DiRTgarage

Buy a bumbag and embrace the flutters!!

How long is it between shuffles? and how audible? the crossover pipe is the obvious answer but you can lower the volume a few different ways if you cbf with the pipe...

I have done back to back testing with this shiz...joining the pipes kills the shuffle...instantly.

but it softens the turbo's up a little too.

not in all cases, i have the HKS balance pipes and i still get a very slight shuffle, but it has improved it quite alot but yeh not totaly fixed

Edited by UWISSH!
yes they are

car was tuned by jim at crd

wow...mine was perfect after the exhaust manifold balance pipes and CRD tune...i wonder whats different in your set-up to mine?

donkey...HKS make the manifolds...very expensive due to the fact they are highly sought after and now dis-continued. I recently saw a set on GTR UK and they wanted 1000GBP for them which is 2000AUD. I recommend a tune due to the fact the spool rates are slightly different and the engine maybe using different load cells from the map after the change is made.

Edited by DiRTgarage

hahahah stevo. single ftw :P

oh, pitty you have the stock manifolds. making a balance pipe could be a drama. a single butterfly inlet manifold would help alot. (more vacume to keep the bovs open...)

my 2c

ps.. you should try 2510 turbos.. uber shuffle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...