Jump to content
SAU Community

Recommended Posts

hey guys was hoping to accompany the help of u guys to help me find threads that will help me with my rb25det conversion into my r32 gtst. iv found one thread so far but it doesnt really help u just tells u a bit of what needs to be done. if there is a step by step procudeure or detailed description of what needs to be done very grsateful if u could post it up so i can get my conv done asap so i get the driftpig back out of track

thanx guys

Edited by Harry-Hotpants
Link to comment
https://www.sau.com.au/forums/topic/255617-rb25det-into-an-r32/
Share on other sites

Remove RB20.

Drop RB25 in (complete with RB25 engine harness and ecu).

Connect everything.

Drive away.

If you want to do the gearbox aswell, there are many threads in the Drivetrain section in regards to putting 25t gearboxes in R32 GTSt's.

Use the same mounts but use the RB25 engine harness and ECU (ecu obviously but I think the difference between the harness is the injectors wires are the other way round or something like that).

Climate control should be fine, haven't heard otherwise.

If you really wanted to, you could swap the wires to the injectors and run it on the RB20 ECU (as it is easier to remap) but you wouldn't have VVT.

Greg, same *should* apply to your GTS4. Just re-use all the mounts etc, though I'm not sure if there would be any dramas with the RB25 ecu needing to talk to the ATTESSA computer at all..

We put a twincam 30 in my mates GTS4 but I believe that is running on a GTR powerfc.

I would also not bother with the dualstage solenoid boost control (stock 33 setup), just put your RB20 actuator on and plumb straight to that.

Edited by bubba

bubba: in regards to the physical work im 100% clued in its the wiring changes that have to be made re: rb25 engien loom connecting to r32 body loom and also what is to be done re: changing speedo cable to electronic for the dash etc

If you already know what needs to be done, why were you asking then?

What exactly do you mean about changing speedo cable to electronic for the dash?

Are you putting a 25t gearbox in too?

It's not rocket doctory :)

If he's keeping his RB20 gearbox then he doesn't need to change anything.

If he is putting a 25t box in then he can't re-use the RB20 sender.

I'm not exactly sure what he was getting at with the sender question, hence why I asked for clarification :banana:

Edited by bubba

yeh i am putting in the rb25 box in aswell. i didnt kno whether the rb20 ccable will mate into the rb25 box of if i have to use the electronic setup from the rb25 box and make changes with my cluster. i need to kno what changes need to be made regarding mating the rb25 engine loom to the r32 chassis loom etc.

also "cmoney" ur link isnt working for me.... :domokun:

Edited by Harry-Hotpants

Have you searched at all dude? I know there's at least one thread on RB25 into R32 and I know there's a few threads on 25t boxes into R32 GTSt's, in those I, among others, documented what we did.

No offence mate but the search function is there for a reason.. so we don't have to keep typing out essays :( if you have any specific questions, shoot me a PM :)

i believe this is what you are looking for

http://www.skylinesaustralia.com/forums/Rb...RB25+conversion

btw, if u are looking for a 25det pfc and wiring harness, ill have one mid year for sale

Edited by ahh 33 s2

bubba i am specifically looking for the changes that may/need to be made in regards to the rb25 engine loom into the r32 body loom, that is what i have not yet been able to find. i did state that above

http://www.skylinesaustralia.com/forums/Rb...amp;pid=4378780

Wiring

Wiring is pretty straight forward if you have the correct diagrams and ecu pin outs. I'd recommend using the RB25 loom and ECU, which is what I used. This a) allows easy engineering to meet polution standards b) Allows you to run the cheaper and more readily available RB25 powerFC. Once you can get the stock ECU working fine, just drop in the PowerFc and it should work right away.

I won't go through the whole lot here, but a few things to note.

1. Grey wire near the main engine bay plug is your 12v constant injector feed. Make sure this is hooked up to a 12v line. Without this the car won't start.

2. It's not a bad idea to splice in your original engine bay resistor (passenger strut tower, silver block thing) from the rb20 loom back through the firewall and to the thick black and white wires of the r32 body loom. This provides backup ground to your fuel pump incase you lose the grounding in the boot area. It will work without it, but is a valuable safety measure which is worth keeping if you value the engine.

3. Use the O2 sensor from an RB25. I believe the R32 one is different. Effects fuel economy

4. To get the wipers working, you can use the r33 loom plug as a direct fit into your wiper.

There is another plug nearby which looks similar. You'll need to connect the orange in this plug as well or your wipers won't turn off once turned on until IGN is turned off Cut the orange up near the plug, and run a wire to this through the firewall, and this connects to one of the wider R32 body loom plugs. There is like a thick orange and a thick green next to each other. Connect this to the orange. This turns the wipers off when you whack the wiper switch back to "off". Took a while to work this out.

You also need to attach 12v IGN source to blue w/ red stripe on that plug. Hook the black with silver blotches to GND (or chasis).

The rest of the r33 plug is 'spare' and the other wires can be left disconnected down near the r33 ecu part of the loom as well.. On the R33 it connects to a brown junction box on the passenger side...but on the R32, this is on the driver side and can stay there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...