Jump to content
SAU Community

Recommended Posts

Hi Guys,

I've recently got my R32 GTR on the road... and I'm noticing that within 500km, im smelling fuel in the oil... its quite noticeable if you do an oil change and let the old oil sit in a bottle for a day or so.... I'm wondering if its just overfuelling and getting into the oil past the rings. I get a small ammount of black 'dust' on the rear bumper after a few days of to-and-from work.

I'm going to do an oil and filter change again tomorrow morning and get it on a dyno to see if its just overfuelling, but I thought I'd ask if anyone else has noticed similar themselves or had any ideas of what the problem might be?

Cheers!

-Shaun

Link to comment
https://www.sau.com.au/forums/topic/255808-oil-smells-like-fuel-within-500km/
Share on other sites

Is it ever hard to crank over in the morning after sitting overnight?

As in, it cranks, suddenly slows, then fires and starts up?

I had same issue in a CA powered 180sx, it turned out to be leaking fuel injectors. I would drive the car around like normal, no issues. Park the car overnight, but becaue injectors where dirty and stuck open, the pressure left in the fuel line would force some of the fuel out through the injectors, and into the clinder caverty. Overnight, the fuel was make it's way past my worn rings, and eventually dribble into the sump, mix with the oil, and thin out my oil.

I had the injectors removed and tested, and they where horrbily dirty, boardering on replacement, but had them vigorously cleaned, re-tested, and after they where confirmed working alright, had them refitted.

Car drove MUCH better, was punchier on acceleration, but went from using 1 tank of fuel within 270kms to using 1 tank of fuel every 400kms.

B.

Is it ever hard to crank over in the morning after sitting overnight?

As in, it cranks, suddenly slows, then fires and starts up?

I had same issue in a CA powered 180sx, it turned out to be leaking fuel injectors. I would drive the car around like normal, no issues. Park the car overnight, but becaue injectors where dirty and stuck open, the pressure left in the fuel line would force some of the fuel out through the injectors, and into the clinder caverty. Overnight, the fuel was make it's way past my worn rings, and eventually dribble into the sump, mix with the oil, and thin out my oil.

I had the injectors removed and tested, and they where horrbily dirty, boardering on replacement, but had them vigorously cleaned, re-tested, and after they where confirmed working alright, had them refitted.

Car drove MUCH better, was punchier on acceleration, but went from using 1 tank of fuel within 270kms to using 1 tank of fuel every 400kms.

B.

Cranks over easily any time.. warm or cold, even after leaving it for a week and a bit being on holidays, was easy to crank over.

What you're suggesting makes alot of sense, hoever its a remote possability in my case... this engine came out of a half cut a few months ago, but everything is in really good nick, right down to the sides of the cam lobes being sharp enough to cut you! Makes plenty of power, solid 175psi dry compression across the board etc. I've not run injector cleaner or anything thru it yet - worth a shot though.

I'm gonna be fitting some big injectors in the next month or so to go along with a vipec ECU - all in preperation for some -5 turbos... if its leaky injectors, that'll fix it for sure.

Cheers!

-Shaun

Is it ever hard to crank over in the morning after sitting overnight?

As in, it cranks, suddenly slows, then fires and starts up?

I had same issue in a CA powered 180sx, it turned out to be leaking fuel injectors. I would drive the car around like normal, no issues. Park the car overnight, but becaue injectors where dirty and stuck open, the pressure left in the fuel line would force some of the fuel out through the injectors, and into the clinder caverty. Overnight, the fuel was make it's way past my worn rings, and eventually dribble into the sump, mix with the oil, and thin out my oil.

I had the injectors removed and tested, and they where horrbily dirty, boardering on replacement, but had them vigorously cleaned, re-tested, and after they where confirmed working alright, had them refitted.

Car drove MUCH better, was punchier on acceleration, but went from using 1 tank of fuel within 270kms to using 1 tank of fuel every 400kms.

B.

the cranking issue could mean a faulty fuel pump

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...