Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just bought a cooler for my 34.

When trying to install I have ran into a couple of issues.

1. The thermal fan is in the way. How do you get around this?

2. Where do you bolt it to? It's got bolt holes on the left and right but I can't work out how to use these to bolt it to the car.

Any help appreciated.

Dean

Link to comment
https://www.sau.com.au/forums/topic/256107-r34-intercooler-install/
Share on other sites

mine is a just jap stealth one, i had some help with mine aswell, basically on the r33 there were come prexisting bolts close to where the intercooler lined up to (not exactly right) so bolted one on and the other is cable tied. also at the top of the intercooler there was another bracket that fitted to where one of the horns was bolted to, this is also cable tied lol. For the thermal fan i had no problem, it is very close but doesnt touch my thermal fan.

the intercooler doesnt weigh much and the single bolt can support it fine, i just threw the cable ties incase..... i check them every now and then incase they get weak...

r34 and r33 are meant to be the same in regards to mounting fmic's..... well thats what just jap said to me when they gave me a box that said R34 on it....

is the core 1 of them universal ones? if so you'll need to make up your own brackets for mounting it

if its model specific it should have a bracket on the top of the core in the middle which uses the same bolt as the bonnet release thingy

should also another 1 or 2 down the bottom of the core

dunno bout the thermo fan though never heard of that happening...

supose you could get a longer bracket so the core sits further away from the fan and radiator, (assuming you have enough room in your front body kit.....

Get an angle grinder and start shaving lol

ive got a HDI one and i know what you mean by the thermal getting in the way,

basically we started to hack the edges off but in the end. the amount of hacking into the thermal fan would've made the fan useless. I bought 1 14" ( attachted to the radiator) and 1 (attached to the air con condenser) 10" thermal from super cheap and now she works fine oh and i removed the rio support and made up some stainless brackets witch one side bolted onto the radiator support and the other side on the top holes of the intercooler.

hope that helps

p.s if you need pics just pm me i know how frustrating it is lol

Edited by 342NV

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...