Jump to content
SAU Community

Recommended Posts

DUE TO A NEW FAMILY MEMBER GOTTA SELL MY SKYLINE IN 4 WEEKS OR WILL TRADE IT IN FOR A BARGAIN (how much would they give me 4 trade in... $15.000-$16.000) GOTTA TRY AND GET A BIT MORE :rolleyes:

BLACK SKYLINE GTST R33, 1994 MODEL, 5 SPEED MANUAL

-ORIGINAL 17" VOLK RACING WHEELS WITH NEW 225x40 RUBBER FRONT AND ABOUT 70% OF 255x45 RUBBER BACK,

-400R BODY KIT,

-HKS AIRPOD FILTER IN,

-3" STAINLESS STEEL EXHAUST ALL THE WAY THROUGH WITH JAPANESE MUFFLER,

-AUTOMETER BOOST GAUGE, 9psi

-STEREO SYSTEM WORTH $2000+ (2x12" MTX SUB, 1000W AMP, 400W AMP, PHILLIPS SPLITS...)

-QUIKTRAK SATELLITE TRACKING DEVICE

-DAIKEN DOUBLE PLATED CLUTCH (NOT HEAVY ON THE FOOT) 4MTHS OLD

-NISMO GEARKNOB

-NUMBER PLATES WLD33R

-CAR HAS 111.000 GENUINE KMS WITH SERVICE BEEN DONE EVERY 5000-7000KMS,

-HAD BIG SERVICE DONE AT 100.000KMS (NEW TIMING BELT + ALL AXILERY BELTS, NEW NRG SPARK PLUGS, NEW BENDIX PERFORMANCE BRAKES, NEW OIL FILTER + OIL...),

-LAST SERVICE JUST DONE AT 110.000KMS,

-ALL SERVICES DONE BY GUYS AT JUSTJAP

FOR SOME PHOTOS OR MORE INFO E-MAIL ME [email protected] OR SMS/CALL ME 0404 887 845

ASKING PRICE IS AROUND $20.000ono

ALL OFFERS AROUND 20K WELCOME

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

did find this site until a week or so ago. didn't own a skyline then. sorry

btw anyreason for the SCREEEEMING. not that it maters. i suppose it stands out a bit more.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...