Jump to content
SAU Community

Recommended Posts

yo guys.

its 12:30am (just got back from a wedding) and im pumped for this morning... i hope someone has a size 17 socket so as i can take my wheels off, otherwise i'll be using some very ordinary brake pads!

as duncan repeated, meeting point will be BP/Hungry Jacks on King Georges Rd, Lakemba at 7am- allbeit i feel as though this post is too late...should be on the track by 10am.

i know of 3 other cars making it down. unsure of who else...

Great day at the track yesterday. Woulda been better if their were no bikes or v8 auscars but oh well you get that on an open day I guess.

Highlights of the day for me were:

* Stock Camry with the *beep beep* down the main straight

* White R33 GTR who couldn't help going sideways (smoke or no smoke)

* Franks R34 GTT screeeeeeaming past heading for turn 1

* Franks forgetting the directions back to the Hwy :D

Looks like an interesting track, can't wait to get out there (hopefully on an SAU Private day)

Originally posted by franks

yeah thanks for sticking around ben! you must've been pretty bored/frustrated!

Nah wasn't bored at all, today was just an obervation day to take in all the sights etc ready for when i give that track a good hammering towards the end of the year.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...